Overview
The Baer Brakes 4261559S is a silver 11.9 inch front rotor kit for 16 inch and larger wheels on Ford Bronco applications. It fits the 1966 to 1975 Ford Bronco in Custom, Northland, Ranger and Sport trims and is designed for off-road use.
The pre-assembled directional rotors have a slot, drill and zinc finish and install as a direct bolt-on fit on a 5×5.50 wheel bolt pattern. The kit includes dust and weather seals, NAS hardware and a silver 6P caliper.
Key features
- Direct bolt-on design
- Pre-assembled slot, drill and zinc finish directional rotors
- Dust and weather seals
- NAS hardware
- Designed for off-road use
- Corvette C5 and C6 pads for easy pad replacement
- Silver 6P caliper
Checking spindle and wheel fit
Front brake upgrades on a Bronco depend on the spindle under the truck. Drum and disc spindles mount parts in different places, so the first step is identifying which one is installed. Look behind the wheel at the backing plate or caliper bracket, and compare the hub face with your ordering information before you start.
Wheel clearance matters as much as the rotor itself. Off-road use puts more stress on bearings, seals and hub bolts, so inspect them while the wheel is off. Clean the hub face, confirm the rotor sits flat, and check that the wheel backspacing leaves room for the caliper and rotor.
- Clean rust from the hub face before mounting the rotor
- Repack or replace wheel bearings during the job
- Check tire rub after the first test drive on rough ground
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261559S |
| UPC | 844165054238 |
| Sold as | Kit |
| Country of origin | USA |
| Rotor diameter | 11.9 inch |
| Caliper | 6P, silver |
| Rotor surface | SDZ |
| Wheel bolt pattern | 5×5.50 |
| Minimum wheel diameter | 16.0 inch |
| Axle | Front |
| Template | Q040E |
| Box count | 1 |
Vehicle fitment
The Pro+ front application is for 1971 to 1975 Ford truck Broncos with stock drum spindles only.
Model years outside 1966 to 1975 and other Ford models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct bolt-on fit. Check your spindle type before mounting, since the front application is limited to stock drum spindles.
What’s included
Pre-assembled directional rotors, NAS hardware and dust and weather seals are included. Check the package contents against your installation before starting.
Not included: Brake hoses are not included.
