Overview
The Baer Brakes D1274 is a set of four rear Claw brake pads for the 2007–2012 Dodge Nitro, 2008–2012 Jeep Liberty and 2007–2018 Jeep Wrangler JK. It is a rear-axle ceramic friction set aimed at owners who want quiet, low-dust rear braking.
The pad set includes abutment clips, pad shims and a mechanical pad wear sensor, with the wear indicator attached. Mounting hardware is not included with this set, so plan to reuse your existing rear hardware or get a matching kit separately. The Nitro and Liberty entries carry qualifiers for standard duty or heavy duty brakes with 302 mm or 332 mm front brake rotors.
Key features
- Rear axle application for Dodge Nitro, Jeep Liberty and Jeep Wrangler JK
- Ceramic friction material in the premium grade type.
- Pad shims included
- Abutment clips included
- Mechanical pad wear sensor included, with wear indicator attached
- Slotted pads with black backing plates
- Four pads per set
- Designed for quiet, low-dust rear braking.
Rear brake service tips
Rear pads do less work than front pads on most vehicles, so they often last longer, but they still need periodic inspection. Look at the pad thickness through the caliper window and check the rotor surface for scoring or a lip at the outer edge. Uneven wear on one side can point to a sticking caliper slide pin, which should be cleaned and lubricated before the new pads are installed.
Rear drum and disc setups differ, so confirm which type the vehicle uses before buying parts. Hardware such as the caliper bracket bolts and slide pins is commonly replaced during a pad change, especially when the old hardware shows corrosion. Fresh hardware and clean contact points help keep the pads quiet and keep the brake pedal feeling consistent.
- Inspect slide pins and boots at each pad change
- Clean the bracket and contact points before fitting
- Check rotor surface for scoring or a raised lip
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1274 |
| FMSI number | D1274 |
| UPC | 844165052838 |
| Axle | Rear |
| Pads per set | 4 |
| Friction material composition | Ceramic |
| Grade type | Premium |
| Abutment clips included | Yes |
| Pad shims included | Yes |
| Pad wear sensor | Included, mechanical type |
| Wear indicator attached | Yes |
| Slotted | Yes |
| Backing plate color | Black |
| Mounting hardware included | No |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
The set fits these rear applications:
- 2007–2012 Dodge Nitro, with standard or heavy duty brakes and 302 mm or 332 mm front brake rotors
- 2008–2012 Jeep Liberty (KK), with standard or heavy duty brakes and 302 mm or 332 mm front brake rotors
- 2007–2018 Jeep Wrangler (JK)
Other Wrangler generations such as the TJ, LJ and JL are not covered, and Dodge Nitro or Jeep Liberty years outside the ranges above do not apply. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is not included, so reuse your existing rear hardware or get a matching set separately. Check your rotor diameter against the Nitro and Liberty qualifiers before fitting. Rear brake work is safety-critical; bed the pads in gently and test braking at low speed first.
What’s included
Four rear brake pads with abutment clips, pad shims, a mechanical pad wear sensor and an attached wear indicator.
Not included: mounting hardware and brake lubricant.
