Overview
The Baer Brakes Street 6S/6R/Xtr Disc Brake Pads, part number D1247R, are replacement pads for Baer 6S, 6R and Xtr calipers used in the Extreme and Extreme Plus systems. They also fit an older Alcon Billet two-piece six-piston caliper, which makes them useful for owners of that setup. They are a street compound for smooth, quiet stopping in light to moderate use.
Each set holds four slotted ceramic pads, supplied as axle sets for the front and rear. The performance ceramic compound gives consistent bite at low to moderate temperatures, and these pads are not made for extreme use conditions. Two pad anti-rattle clips are sold separately, so have them ready before fitting.
Key features
- Replacement pads for Baer 6S, 6R and Xtr calipers.
- Also fits an older Alcon Billet 2pc 6 piston caliper.
- Performance ceramic compound with consistent initial bite at low to moderate temperatures.
- Street pad design for smooth stopping with low noise and low dust.
- Slotted pad face for the Extreme and Extreme Plus systems.
- Four pads per set, sold in axle sets.
Choosing pads for an older caliper
Pads for a larger multi-piston caliper need to match the caliper’s pad pocket and backing plate shape exactly, so a close fit matters more than the friction rating alone. Owners of older two-piece calipers should confirm the bore pattern and clearance before ordering, and should measure rotor thickness against the minimum stamped on it, since worn rotors can cause pad chatter and uneven wear.
Anti-rattle clips hold the pad in the caliper bracket and keep it from moving under vibration, which reduces noise on rough roads. Clean the bracket ears and slide surfaces, apply a thin coat of high-temperature caliper grease where needed, and keep lubricant off the friction face. Bed the new pads in gradually before loading them with hard stops.
- Check rotor minimum thickness before fitting
- Replace anti-rattle clips if they are bent or worn
- Inspect caliper pistons and seals during pad changes
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1247R |
| UPC | 844165050469 |
| Series | Extreme/ Extreme+ Systems |
| Caliper type | 6R, Xtr, 6S |
| Cross reference | D1247, DR11 |
| Brake pad type | Street |
| Friction material | Ceramic |
| Grade | Premium |
| Pads per set | 4 |
| Axle | Front, rear |
| Backing plate color | Black |
| Slotted | Yes |
| Abutment clips included | No |
| Bolts included | No |
| Mounting hardware included | No |
| Pad shims included | No |
| Pad wear sensor included | No |
| Wear indicator attached | No |
| Brake lubricant included | No |
| Box count | 1 |
| Country of origin | IN |
| Emission code | 6 |
Vehicle fitment
No vehicle fitment list is provided. The pads are described by caliper, so match them to a Baer 6S, 6R or Xtr caliper, or an older Alcon Billet 2pc 6 piston caliper, before choosing this set.
Installation notes
The set is slotted and comes without clips, bolts or shims. The two pad anti-rattle clips are sold separately, so have them ready when you fit the new pads to the caliper.
What’s included
Each kit includes four brake pads for a 6S, 6R or Xtr caliper set.
Not included: the two pad anti-rattle clips, abutment clips, pad shims, bolts and mounting hardware.
