Overview
The Baer Brakes Claw D0966 is a set of four front ceramic brake pads for the 2003–2005 Dodge Ram 1500, excluding SRT-10 models, and the 2003 Dodge Durango. Baer Brakes positions the set as an affordable option for daily-driven trucks and SUVs.
Baer Claw pads use a ceramic compound that the brand describes as formulated for long-lasting, consistent performance. The pads are presented as OE replacement pads, with an emphasis on minimal noise and dust, long pad life and low rotor wear. The brand also describes break-in as quick and easy.
If you are replacing worn front pads on a 2003 Durango or a 2003–2005 Ram 1500 that is not an SRT-10, the D0966 is the part number to match when you compare boxes.
Key features
- OE replacement pads with consistent wear and performance and minimal noise and dust
- Premium high friction ceramic compound
- Long pad life with low rotor wear
- Balanced for road-going civility on daily drivers
- Stainless steel abutment and anti-rattle hardware included with most pads
- Slotted pads with a black backing plate
Bedding in and checking rotors
Ceramic pads need a controlled break-in before they reach full friction. Make a series of moderate stops from road speed, letting the brakes cool between them so the pad surface and rotor face transfer an even layer. Avoid holding the pedal down at a stop right after break-in, since heat can glaze the surface before the pads have settled.
When the pads come off, look at the rotor face for scoring, blue heat marks or a lip at the outer edge. Light scoring can often be cleaned up, while deep grooves or uneven thickness usually mean the rotor should be resurfaced or replaced alongside the pads. Clean the caliper bracket and clips, then apply brake lubricant to the contact points before reassembly.
Signs the old pads are worn include a high-pitched squeal, a grinding noise, longer pedal travel, or a steering wheel that pulses under braking. Any of these means the pads should be checked soon, and both sides of the axle should be replaced together so braking stays balanced.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D0966 |
| UPC | 844165019343 |
| Axle | Front |
| Friction material | Ceramic |
| Grade type | Premium |
| Pads per set | 4 |
| Sold as | Set |
| Slotted | Yes |
| Backing plate color | Black |
| Abutment clips included | Yes |
| Mounting hardware included | Yes |
| Brake lubricant included | No |
| Wear indicator attached | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list places this set on the front axle of two applications: the 2003 Dodge Durango and the 2003–2005 Dodge Ram 1500, excluding SRT-10 models.
The list does not cover 2006 and later Ram 1500 models, SRT-10 trucks, or Durango model years other than 2003. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The set includes abutment clips and mounting hardware, but brake lubricant is not included, so the contact points will need lubricant from another source. Replace the pads as a complete front axle set so that both sides brake evenly, and inspect the rotors when the pads come off.
What’s included
Four front pads per set with stainless steel abutment clips and noise suppression hardware for most applications, plus mounting hardware.
Not included: brake lubricant.
