Overview
The Baer Brakes D0413R is a rear street brake pad set for Baer SS, Sport and Track rear systems that use Pbr single-piston calipers. It is a ceramic pad sold in a set of four, cross-referenced to HB112, DR413 and FMSI D413.
The ceramic compound gives good initial bite at low to moderate operating temperatures, which suits daily drivers, weekend drivers and mild track use. It is not meant for extreme use conditions. Rear Corvette brakes (88-96) are cross-referenced for comparison, and the pad is positioned for Pbr 1-piston rear systems.
Key features
- Pbr single-piston rear pad for Baer SS, Sport and Track systems
- Ceramic friction material with Performance grade
- Smooth, low-noise stopping in light to moderate conditions
- Non-slotted street pad
- Sold in axle sets of four pads
Choosing the right setup
Pbr single-piston rear calipers are compact, so pad thickness and backing plate fit are the main points to check. A ceramic street pad suits quiet, predictable braking in daily use and light track days. Its friction level is set for moderate heat, so pads for heavy use or repeated hard stops should be chosen with that load in mind.
Rear pads are often changed alongside the rotors, because a worn or grooved rotor can keep a new pad from seating evenly. When replacing them, measure rotor thickness against the stamped minimum, clean the caliper bracket, and lubricate the slide points lightly with the correct grease.
- Check the caliper type before ordering
- Measure rotor thickness at each pad change
- Keep pad surfaces free of grease
- Bed in new pads before firm stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D0413R |
| UPC | 90127862513 |
| Series | Pbr Single Piston: Baer SS, Sport and Track rear systems |
| Caliper type | Pbr 1-Piston |
| Axle | Rear |
| Brake pad type | Street |
| Friction material | Ceramic |
| Grade | Performance |
| Pads per set | 4 |
| Slotted | No |
| Backing plate color | Black |
| FMSI number | D413 |
| Cross references | HB112, DR413 |
| Country of origin | IN |
| Pad shims included | No |
| Pad wear sensor included | No |
| Abutment clips included | No |
| Bolts included | No |
| Mounting hardware included | No |
Vehicle fitment
The pad is made for rear Baer SS, Sport and Track systems with Pbr 1-piston calipers. Rear Corvette brakes (88-96) appear as a cross-reference only, not as confirmed fitment.
Brakes built for Corvette axles can differ from the Baer rear systems this pad is made for. Confirm your vehicle’s year, model and trim before ordering, and compare the caliper type with your current hardware.
Installation notes
The 2 guide pins and 2 E-clips for the caliper are sold separately, so confirm that your Pbr caliper has the correct hardware before fitting the pads. Abutment clips and noise suppression hardware are also sold separately.
What’s included
Four Pbr single-piston rear brake pads with ceramic friction material, sold as one axle set.
Not included: caliper hardware (2 guide pins and 2 E-clips), abutment clips, bolts, mounting hardware, pad shims, pad wear sensor and brake lubricant.
