Overview
The Baer Brakes 6T Brake System, part 4011001HO-2, is a front brake kit for the 2024–2025 Toyota Tacoma. It pairs a 6-piston, direct-mount 6T caliper in Hugger Orange with a 1-piece slotted, zinc-plated vented rotor and uses the FMSI D1247 pad type.
The Baer 6T front kit suits drivers who want more front braking hardware than stock. The rotors have a curved vane design that supports cooling, consistent braking and reduced brake fade. The kit is designed to fit most 17 inch or larger wheels, but fit with every wheel style cannot be guaranteed, so compare the template against your wheel.
Key features
- 2-piece, 6-piston, direct-mount 6T caliper with a fixed design
- Caliper CNC machined from US sourced forged or billet aluminum
- Powder coated caliper finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure, with T compliant dust and weather seals
- 1-piece slotted and zinc-plated rotor with a curved vane design
Lifted trucks and brake lines
Lifting a Tacoma changes the geometry the brake system was built around. The wheel moves outward and the hose angle changes, so a line that clears at ride height can tighten at full suspension travel. Route the hoses with the suspension at full extension and again after any ride height change.
Wheel offset also decides how close the wheel sits to the caliper and rotor. Compare the caliper body and rotor edge with the inner barrel of the wheel before mounting. A wheel that clears the template can still rub after a suspension change, so recheck clearance after any lift work.
- Check hose length against the lift height before installing
- Route lines away from sharp edges and suspension travel paths
- Recheck wheel clearance after any lift or tire size change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4011001HO-2 |
| UPC | 90127970041 |
| Sold as | Kit |
| Caliper | 6-piston, 2-piece, direct-mount fixed 6T |
| Caliper color | Hugger Orange |
| Rotor type | 1-piece slotted and zinc-plated |
| Rotor construction | Vented |
| Rotor outside diameter | 13.586 in |
| Rotor thickness | 1.18 in |
| Pad FMSI number | D1247 |
| Friction material | Semi-metallic |
| Brake hose material | Steel braided |
| Brake hose DOT approved | Yes |
| Wheel bolt pattern | 6×5.50 in |
| Lug count | 6 |
| Minimum wheel diameter | 17.0 in |
| Template | O185M |
| Grade | Performance |
| Country of origin | USA |
Vehicle fitment
The kit is for the 2024–2025 Toyota Tacoma, which covers the Tacoma 24-25 application. Confirm your vehicle’s year, model and trim before ordering.
This kit is listed only for the 2024–2025 Toyota Tacoma and does not cover earlier Tacoma generations or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The braided hoses are sized for stock-height vehicles, and lifted vehicles may need longer hoses. Check hose length against your lift height before installing on a lifted Tacoma.
Compare the Baer O185M template against your wheel before mounting, since wheel style affects fit. Brake work is safety-critical, so have a qualified technician install and test the system if you are not experienced with brakes.
What’s included
The kit includes the 6T caliper, 1-piece slotted rotor, D1247 pad type, all mounting brackets, braided brake hoses and hardware.
Not included: Wheels are not part of this kit, and wheel fit must be checked with the template.
