Overview
The Auto Meter 7040 is a complete instrument kit for the Jeep YJ, part number 7040. It packages the most popular Jeep gauges into one kit: a speedometer, water temperature, oil pressure, fuel level (0-90 ohm) and voltmeter.
It is an officially licensed Jeep product with a black dash and black Jeep gauges. It uses a universal Auto Meter wire harness 2198 that includes warning LEDs.
Key features
- Speedometer, water temperature, oil pressure, fuel level and voltmeter gauges
- Black dash and black Jeep gauge faces
- Universal Auto Meter wire harness 2198 with warning LEDs
- Temperature and pressure senders included
- Red and green bulb covers on the bulb and socket assemblies
Gauge wiring basics
A gauge kit reads signals from senders mounted on the engine and fuel system, so each gauge depends on a clean connection to its sender. Route the harness away from hot exhaust parts, moving parts and sharp edges, and secure it with clips so vibration cannot pull a connector loose during driving.
Ground connections are a frequent source of gauge problems. Use a clean, bare metal ground point and tighten it firmly. After installation, start the engine and watch each gauge for steady readings. Erratic movement often points to a loose ground or a connector that is not fully seated.
- Use a clean bare-metal ground point
- Secure the harness clear of heat and moving parts
- Check each gauge reading after the first drive
Specifications
| Brand | Auto Meter |
|---|---|
| Part number | 7040 |
| UPC | 46074070655 |
| Gauges | Speedometer, water temperature, oil pressure, fuel level (0-90 ohm), voltmeter |
| Dash | Black |
| Wire harness | Auto Meter 2198 with warning LEDs |
| Senders | Temperature and pressure |
| Bulb covers | Red and green |
Vehicle fitment
The kit is for the Jeep Wrangler (YJ) from 1987 to 1995.
The kit is not for the TJ, LJ, JK, JL or later Wrangler generations, and other Jeep models such as the Cherokee XJ are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a wire harness and temperature and pressure senders, so the gauges need wiring to the senders and power. Disconnect the battery before wiring the harness, and follow wiring steps suited to your vehicle.
What’s included
The kit includes the gauges, wire harness 2198 with warning LEDs, temperature and pressure senders, and bulb and socket assemblies with red and green bulb covers.
Not included: Confirm whether a fuel level sender is needed for the 0-90 ohm fuel gauge before wiring.









