Overview
The Kentrol Gauge Cover in polished finish, product number 30412, is a stainless steel instrument panel cover for the dash gauge area. Its cutouts are made for heater control knobs, dash indicator lamps, the speedometer, the factory radio, the oil gauge and the voltmeter.
No vehicle fit is confirmed for this item. Check your instrument panel’s size and cutout layout against the cover before planning the drilling. The cover is made from 304 surgical grade stainless steel, which resists rust.
Key features
- Polished stainless steel finish
- Cutouts for heater control knobs, dash indicator lamps, speedometer, factory radio, oil gauge and voltmeter
- Stainless steel hardware included
- Occasional waxing keeps the mirror-like shine.
Planning a gauge cover install
Drilling is the step that deserves the most care. Before marking anything, hold the cover against the panel and confirm each cutout lines up with its gauge, lamp, control or radio. Use a center punch on each screw location, start with a small pilot hole, and step up in size only after checking alignment. Small burrs left on the metal can catch wiring or scratch the cover, so deburr each hole.
Stainless steel resists rust, but it can still scratch during drilling, so protect the finish with masking tape and keep the drill bit lubricated. Take the old cover off carefully and note how the panel sits before removing any fasteners. Work with the dash clear of loose wires, and check that nothing is pinched when the cover is fitted.
Specifications
| Brand | Kentrol |
|---|---|
| Product number | 30412 |
| UPC | 812421020150 |
| Finish | Polished |
| Material | Stainless steel, 304 surgical grade |
| Hardware | Stainless steel hardware included |
| Installation | Drilling required; four screws hold the cover onto the instrument panel |
Vehicle fitment
Confirm the cover suits your Jeep’s instrument panel before drilling.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, and four screws hold the cover onto the instrument panel. The heater control cables must be removed for installation. Disconnect the battery before working behind the dash.
What’s included
Polished stainless steel gauge cover with stainless steel hardware.
















