Overview
The Aries Offroad 4 inch oval side bars, part number ARSS224045, are cab-length nerf bars for Chevrolet Silverado and GMC Sierra trucks from the 2007 through 2019 model years. They add a raised step with a non-skid pad at the door, so entry and exit are easier and more comfortable.
The bars use 4 inch elliptical tubing with blended end caps that contour to the body of the vehicle. This part is the black version, finished in powder-coated carbon steel. Aries also makes the same 4 inch oval in polished stainless steel, so buyers who want a brighter look can compare the two options.
The oval is built as a vehicle-specific, no-drill bar, so each one is shaped for a particular truck rather than a generic mounting pattern.
Key features
- 4 inch elliptical tubing with blended end caps that follow the body contour
- Raised step pads with a non-skid surface for entry and exit
- Vehicle-specific design built for no-drill installation
- Black powder-coated carbon steel finish
- Cab-length configuration
- All necessary mounting hardware included for a complete installation
Choosing a cab-length bar
Cab-length bars cover the span beside the cab door, which is where most side steps are used for climbing in and out. When choosing one, check how the bar lines up with the door sill and the rocker, and confirm the step is wide enough for the way you enter the truck. A square, close fit keeps the bar from knocking against the body on rough roads.
Oval tubing has a rounded profile that is easier to keep clean than square tube, since mud and grit slide off rather than settling in corners. Blended end caps help the bar follow the body line, but the ends are also where moisture can collect, so rinse them after wet trail use.
Black powder-coated steel shows scratches more readily than stainless when grit is involved, so keep a small amount of touch-up coating on hand. Inspect the mounts and welds after rough use, and watch for any gap that opens between the bar and the body. Those gaps usually mean a bracket needs tightening before the bar takes more stress.
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | ARSS224045 |
| Tube profile | 4 inch elliptical (oval) tubing |
| Finish | Black powder-coated carbon steel |
| Length | Cab length |
| Step surface | Raised, non-skid |
| Fitment type | Direct fit, vehicle-specific |
| Installation | No drilling required |
| Included hardware | All necessary hardware for a complete installation |
Vehicle fitment
The bar covers these Chevrolet Silverado and GMC Sierra trucks: 2007 through 2013 and 2015 through 2018 Silverado 1500; 2007 through 2019 Silverado 2500 HD and 3500 HD; 2007 through 2018 Sierra 1500; 2007 through 2016 and 2019 Sierra 2500 HD; and 2007 through 2019 Sierra 3500 HD. Trims vary by model; the Silverado 1500 covers Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT and XFE.
Other GM truck models and model years outside these ranges are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mounts are vehicle-specific, check that the bar sits square and clears the door before fully tightening the included hardware.
What’s included
Each pair comes with all necessary hardware for a complete installation.












