Overview
The Aries Offroad 3 inch round side bar, part number ARS205000-2, is a polished stainless steel nerf bar for the 1997 through 2004 Dodge Dakota. Its triple-polished finish and vehicle-specific design make it a direct-fit step rather than a universal bar.
The tubes are mandrel-bent for a smooth, contoured look and use heavy-wall 3 inch diameter tubing for strength and rigidity at each step. The bars are built from 304 stainless steel, a high-nickel alloy that Aries says resists rust and corrosion from mud, snow, rain and sand.
This is a custom, no-drill bar for the Dakota with a bright finish suited to a custom build or off-road truck. Its length, bends, pad position and bracket layout are set for the Dakota, so it is not meant for other trucks or SUVs.
Key features
- 304 stainless steel tubes with a high-nickel content for rust resistance
- Triple-polished, mirror-like finish
- Mandrel-bent tubes for a smooth, contoured profile
- Heavy-wall 3 inch diameter tubing
- Black polypropylene non-skid step pads with textured treads and a wide stepping surface
- Carbon steel mounting brackets with a black powder coat finish
- Vehicle-specific, no-drill design with all necessary hardware included
Caring for stainless steel bars
Polished stainless steel keeps its shine with regular cleaning. Road grime, salt and mud can dull the surface if they sit for long periods, so rinse the bars after off-road trips and wash them with mild soap and water.
Avoid steel wool or harsh abrasives, since they can leave fine scratches that hold dirt. A soft cloth and a stainless-safe polish work well on the tubes. Keep the carbon steel brackets in mind as well, because their powder coat can chip and expose bare metal if the bars are bumped during fitting.
Periodically check the bracket bolts and the bar’s alignment with the door. Loosening over time can cause rattles, and a quick tightening restores a solid, secure feel.
- Rinse after muddy trips
- Use mild soap and a soft cloth
- Check bracket bolts periodically
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | ARS205000-2 |
| Bar profile | 3 inch round, mandrel-bent |
| Tubing | 3 inch diameter, heavy-wall |
| Tube material | 304 stainless steel |
| Finish | Triple-polished mirror finish |
| Bracket material | Carbon steel with black powder coat |
| Step pads | Black polypropylene, non-skid textured |
| Installation | No drilling |
| Included hardware | All necessary hardware for a complete installation |
Vehicle fitment
It is a direct fit for the 1997 through 2004 Dodge Dakota in the Base, R/T, SLT, SLT Plus, SXT, Sport and Sport Plus trims.
Dodge Dakota years outside 1997 through 2004, and other makes and models, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are vehicle-specific, so check that the bar sits level and clears the door before fully tightening the included hardware. The mounts are carbon steel with a powder coat, so take care not to chip the coating during fitting.
What’s included
The mounting brackets and all necessary hardware are included with these bars for a complete installation.












