Overview
The ARB OMESD48 is an Old Man Emu steering stabilizer for the 2007–2018 Jeep Wrangler JK, in 2-door and 4-door models, from ARB 4×4 Accessories. It was developed after on-board and dyno testing and has increased compression and extension damping compared with the earlier design. The damping helps the ride and control of the JK Wrangler.
Left hand drive JK Wranglers need ARB part number FK50 to mount the stabilizer above the tie rod. Left-hand-drive vehicles include all American JKs, so check the steering wheel position on your Jeep before ordering.
Key features
- Yellow shock body with a 14mm piston rod.
- Twin tube design with increased compression and extension damping
- Rubber dust boot in place of a steel guard, which gives clearance from other suspension parts.
- Shock boot included with the stabilizer.
- Single-stabilizer layout for the JK.
Fitting a JK steering stabilizer
The Wrangler JK has a solid front axle and a steering linkage that carries movement from rough ground into the wheel. A single stabilizer like this one controls how quickly the steering can rotate, which matters on washboard roads and rocky trails. Owners who run larger tires or a lift should check how the stabilizer sits in its range, since changes to geometry shift the mounting angle.
Left hand drive JKs may need a bracket to mount the unit above the tie rod, and getting that position right affects both clearance and damping. Before installation, inspect the tie rod ends, drag link and track bar for play. After fitting, turn the wheel lock to lock and watch for binding or contact. Recheck the mounting bolts after the first trail runs.
- Inspect tie rod ends and drag link for play
- Check mounting angle after any lift or tire change
- Confirm full steering travel without contact
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMESD48 |
| UPC | 881348012999 |
| Body | Yellow shock body |
| Piston rod | 14mm |
| Design | Twin tube |
| Dust protection | Shock boot included |
| Body style | 2- and 4-door models |
Vehicle fitment
It is a direct fit for the 2007–2018 Jeep Wrangler JK, in 2-door and 4-door models.
The JL and TJ Wrangler generations are outside this fit. Check your year, model and trim before ordering.
Installation notes
Left hand drive JK Wranglers need the ARB FK50 steering stabilizer bracket to mount the stabilizer above the tie rod.
What’s included
One steering stabilizer with the shock boot. Check the package contents before starting the installation.
Not included: the FK50 bracket, which left hand drive JK Wranglers need to mount this stabilizer.





