Overview
The ARB rock sliders, part number 4450010, are black powder coat body-mounted rock sliders for the 1997-2006 Jeep Wrangler TJ. They are a formed plate guard with a tubular standoff.
The rock sliders mount directly to the vehicle body and work with all body lifts and most aftermarket fender flares. They use the original body-mounting design. The steel is 3/16 inch high grade, with 1.25 inch diameter schedule 40 pipe angled upwards 30 degrees, plus internal supports, drain holes and a powder coat finish.
ARB says they are styled to match its front winch bumpers and rear bumpers with swing away tire carriers. Installation requires cutting or drilling.
The sliders suit the Wrangler TJ and mount directly to the body, with an angled tube that gives a place to slide over rocks. Check the package contents against your installation before starting.
Key features
- Body-mounted rock sliders for the Wrangler TJ
- 3/16 inch high grade steel
- 1.25 inch diameter schedule 40 pipe angled upwards 30 degrees
- Internal supports and drain holes
- Black powder coat
- Works with all body lifts and most aftermarket fender flares
Rock slider fitment and care
Rock sliders protect the rocker area and the lower body from trail contact, which matters most on a TJ with a lift or larger tires. Body-mounted designs carry less load than frame-mounted ones, so they are best kept for light rock contact and not for pushing over large obstacles. Check the clearance between the slider and the tires and fender flares after any change in tire size.
Because the mounts involve cutting or drilling into the body, the surrounding metal is exposed to moisture. Seal any fresh cuts with a rust-inhibiting primer and paint, and inspect the mounting points after each season. Look for cracks in the powder coat, loose fasteners, or rust bubbling around the tube joints, since those signs mean the sliders need attention. Clean the sliders after mud runs so grit does not wear the finish.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 4450010 |
| UPC | 9332018006516 |
| Part type | Rock sliders, formed plate guard with tubular standoff |
| Material | 3/16 inch high grade steel |
| Tube | 1.25 inch diameter schedule 40 pipe |
| Angle | Angled upwards 30 degrees |
| Finish | Black powder coat |
| Installation type | Cutting or drilling required |
| Fit type | Direct fit |
| Distributor part number | ARB4450010 |
Vehicle fitment
The manufacturer fitment list for the ARB 4450010 includes:
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
The sliders fit the Jeep Wrangler TJ from 1997 to 2006 only, not the YJ, LJ or JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps in the included instructions and tighten fasteners to the torque suited to the body mounts. Rock sliders attach to the body, so professional installation is often a good choice.
Cutting or drilling is required, so protect bare metal from rust after fitting. Re-check the fasteners after the first miles of driving.









