Overview
The ARB Intensity 40 Inch LED Light Bar, part number AR40CARM476, is a 40-inch LED driving light that mounts to a bull bar or roof rack. It is universal fit, so it is not tied to a specific vehicle model.
A dedicated heat sink and light bar mounting system holds the bar steady, which improves stability and driving vision compared with common mounts on other light bars. The bar uses two rows of 20 individual LEDs behind a polycarbonate lens.
Key features
- Dedicated heat sink and light bar mounting system
- Mounts to a vehicle bull bar or roof rack
- Two rows of 20 individual LEDs
- Patented lens and reflector technology, the same used in existing ARB Intensity LEDs
- Polycarbonate lens
- Engineered in Australia, built in the United States
Cooling and mounting a long bar
A 40 inch bar is a larger mounting job than a single lamp. It puts more weight and wind load on the bracket, so the mount should be solid and the bar should sit square. Check the bull bar or roof rack for flex, and tighten the fasteners in stages so the bar seats evenly. The heat sink handles heat from the LEDs, but airflow around the bar still matters, so avoid covering the fins with tape or dirt.
Bars are often fitted alongside a switch panel, a relay box and other auxiliary lights. Keep the power feed short and fused close to the battery, and route the cable away from hot exhaust parts. After rough trail use, check the bolts, the lens seal and the cable grommets, since vibration is what loosens a bar first.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | AR40CARM476 |
| UPC | 9332018046246 |
| Size | 40 inch |
| Light source | LED, two rows of 20 individual LEDs |
| Lens | Polycarbonate |
| Mounting | Bull bar or roof rack |
Vehicle fitment
Universal Fit: this light bar is not vehicle-specific. Fitting depends on having a bull bar or roof rack to mount it on and on where the bar will sit on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Run the power feed through a fuse and relay, the usual approach for auxiliary driving lights. Check local road-use rules for driving lights before fitting the bar to a road vehicle.
What’s included
Lay out all parts on arrival and match them to your mounting plan.
Not included: a bull bar or roof rack to mount the bar on, plus any wiring or brackets you need for your setup.







