Overview
Rigid Industries’ A-Series LED accessory light, number 482033, is a universal-fit LED light with a compact aluminum housing. It is meant for cabs, boat cabins, beds, trunks and under-hood use.
The unit is waterproof and lightweight. The A-Series range offers several LED colors and high or low power versions, and Rigid positions the lamp as easy to install on almost any flat or tube-style mount.
Key features
- Universal-fit design
- Compact aluminum housing
- Waterproof and lightweight
- Several LED colors and power options
- Radius tube-mount adapter for side or bottom wiring
Choosing a mounting spot
Mounting spot matters more than the light itself with an accessory LED of this type. A flat face suits the rubber flat-mount or an adhesive pad, while a curved or narrow tube is better served by the radius adapters. Look for a surface that is rigid, free of flex, and clear of moving parts such as doors, hatches, cargo and steering components. Check that the chosen spot gives the lamp a useful angle to the work area, since a light aimed at the wrong place wastes its output.
Plan the wire route before drilling. Keep the cable away from sharp edges and heat sources, and use grommets where it passes through metal. Adhesive pads hold best on clean, dry surfaces, so wipe off dust and oil first and allow the bond to cure before loading the mount.
- Flat faces suit the rubber flat-mount or 3M VHB pad
- Curved or tube-style mounts suit the radius adapters
- Keep clear of doors, hatches and steering parts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 482033 |
| UPC | 849774018718 |
| Housing | Compact aluminum |
| Construction | Waterproof, lightweight |
| LED options | Several colors; high and low power versions |
| Mounting hardware | Rubber flat-mount, 3M VHB two-way pad, radius tube-mount adapters |
Vehicle fitment
It is a universal-fit light, so no year, make, model or trim applies. The mounting location and the mount you choose decide suitability.
Confirm the surface and the wire route before drilling or adhering anything. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the flat-mount or 3M VHB two-way pad on flat faces, or the radius tube-mount adapter where the wire must exit at the side or bottom. Wire the lamp through a fuse and check local rules for lights on road vehicles.
What’s included
A rubber flat-mount, a 3M VHB two-way pad and radius tube-mount adapters come with the light.
Not included: Check the power harness, switch and fuse needs against your installation before starting.









