Overview
The PIAA H4 G3 LED bulb, part number 26-17404, is a pair of white 6200K LED replacement bulbs with an H4 base, rated 24 Watts. It is a plug and play LED bulb with factory-style connectors, so it fits a factory H4 socket without splicing, cutting or soldering.
The G3 is built around higher output CREE XP-L chips. PIAA says these provide up to 50% more light output than earlier models, along with a wider viewing angle and a thinner circuit board. An adjustable beam lets installers fine-tune alignment for precise optical output. The bulbs are larger than stock halogen bulbs, so clearance in the housing needs to be checked before fitting.
The redesigned fan provides 70% more airflow than the previous design and cuts fan noise by 40%. Pulse width modulation control is included to reduce flicker in most applications when the lamp runs at lower voltage in daytime running light mode.
Key features
- CREE XP-L LEDs with higher output and a wider viewing angle
- Pulse width modulation control aimed at eliminating flicker in most applications
- Adjustable beam for fine-tuning alignment
- Redesigned fan with 70% more airflow and 40% less fan noise
- Plug and play with OE connectors, no splicing or soldering
- 5-year warranty from PIAA
Heat management and clearance
LED headlight bulbs produce heat at the base rather than the filament, so cooling is part of the design. The fan and heat sink must have room to move air. Keep the housing vent and the area behind the bulb free of dust, and make sure the fan can spin freely before closing the lamp.
A larger bulb body can touch the reflector, the dust cover or the wiring plug. Check clearance with the lamp assembly on the bench before installing. Fan wear is also a sign to watch for: a grinding or rattling fan usually means the bearing is failing and the bulb should be inspected soon.
- Confirm clearance with the lamp removed
- Check the fan for noise or resistance after installation
- Keep the vent free of debris
Specifications
| Brand | PIAA |
|---|---|
| Part number | 26-17404 |
| UPC | 722935811000 |
| Bulb base | H4 |
| Bulb type | LED |
| Color | White |
| Color temperature | 6200K |
| Power | 24 Watts |
| LED chips | CREE XP-L |
| Warranty | 5 years |
| Compliance | Does not comply with FMVSS108 or CMVSS108 |
| Quantity | Pair |
Vehicle fitment
This is a universal-fit bulb identified by its H4 base, and no vehicle models are named. Check the H4 socket and the clearance around the larger bulb body before ordering.
Confirm your vehicle’s year, model and trim before ordering, and make sure your housing has room for the larger body.
Installation notes
Plug and play installation uses the factory connectors, so no splicing, cutting or soldering is needed. Because the bulbs are larger than stock, check clearance in the housing, and note that some models may not be able to use the bulb dust cover. The bulbs do not comply with FMVSS108 or CMVSS108, so check local road-use rules and use fused relay wiring where your setup calls for it.
What’s included
The bulbs are sold as a pair with OE connectors for plug and play fitting. Confirm whether your housing needs a dust cover or other hardware before starting.
















