Overview
The ARB BP5190003L is a front left BP-51 bypass shock absorber from ARB 4×4 Accessories, made for the 2008–2011 and 2013–2015 Toyota Land Cruiser (Base). It is a direct fit, gas charged, and uses a remote reservoir.
The BP-51 was designed, developed and tested in-house by Old Man Emu’s ride engineers. Each shock is vehicle specific and designed to use existing mounting locations, so no additional vehicle modification is needed. It aims for both comfort and control.
The shock’s bypass valving changes the damping as the piston moves through its stroke, which ARB says gives a comfortable ride around town and a more controlled feel over rough terrain. The damper is adjustable for rebound and compression, so the setting can be changed on the vehicle.
The remote oil canister, spring seat, adjuster and top hat are 6061 grade aluminum, and the body is a 51mm bore in type III hard anodized aluminum. The coil is high quality X5K grade steel. Bushings are oversized, the bearings are large and Teflon lined, and the hose is Dash -6 high temperature Teflon. The hard chromed, ground piston shaft is protected by an impact resistant high density polyethylene guard. Part number BP5190003L and UPC 9332018029089 identify the unit.
Key features
- Internal bypass damping that depends on piston position
- Adjustable rebound and compression, on the vehicle
- 6061 grade aluminum remote oil canister
- Large, Teflon-lined spherical bearings
- Impact-resistant shaft guard
- 51mm bore body with a type III hard anodized finish
Land Cruiser shock upkeep
On a body-on-frame Land Cruiser, the front shocks help control body roll, brake dive and the rebound after rough road sections. A bypass design changes damping as the piston moves, which can make the ride feel more settled around town and more controlled over broken ground. Remote reservoirs help the damper stay cooler on long descents.
Front shock work often happens alongside other parts. Tie rod ends, sway bar links, control arm bushings and the front bump stops are commonly inspected when shocks are replaced. Heavier front accessories such as a winch or bumper add load to the front, so consider those when choosing settings.
Inspect the shaft guard, hoses and reservoir mount for abrasion at each service, and check the bushings for cracks. Oil on the shock body or a bouncy front end suggests lost damping. After installation, recheck the mounting bolts after the first few trail runs and confirm that the steering turns freely.
- Inspect sway bar links and bushings
- Check reservoir mount and hose routing
- Recheck mounting bolts after the first trail runs
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5190003L |
| UPC | 9332018029089 |
| Position | Front left |
| Lift height | w/0 in. lift/drop |
| Bore | 51mm |
| Shock type | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
It is made for the 2008–2011 and 2013–2015 Toyota Land Cruiser (Base). The 2012 model year is not covered, and other Toyota models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.







