Overview
The ARB RD187 is a pneumatic air locking differential built for AMC 20 axles, made for front or rear positions. Once engaged, the locker ties both axle shafts together so each wheel gets full drive power, which is useful when traction is lost on rough trails. The gear ratio is 2.73 Down.
Air operation means an ARB onboard air compressor is needed, and it is sold separately. Match the AMC 20 type and 29 spline count to your axle before purchase, since those points decide fit.
Key features
- Full spool locking of the two axle shafts through an air-operated mechanism
- Selectable design: runs as an open differential until engaged
- 29-spline axle count
- Front or rear axle location
- Title ratio: 2.73 Down
Gear ratio and axle choice
Gear ratio is one of the main decisions with any locker. A lower ratio suits highway speeds with less pull at low speed, while a higher ratio gives more pull on a climb at the cost of cruising comfort. Pick the ratio that matches how the vehicle is used, then fit the locker to the carrier and gears that run that ratio.
A locker on a 2.73 Down gear set is a different proposition from one on 3.08 Up. Changing ratio usually means fitting a new ring and pinion, and the carrier should be set up by an axle shop once the locker is in. Use the lock where it helps, such as a rocky climb, and release it on pavement so the tires can turn at different speeds through corners.
- Confirm the ring and pinion match the chosen ratio
- Check carrier bearings when the cover is open
- Release the lock before taking corners on pavement
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD187 |
| UPC | 9332018002952 |
| Axle manufacturer | AMC |
| Axle type | AMC 20 |
| Axle location | Front or rear |
| Axle spline | 29 splines |
| Differential type | Selectable locker |
| Ratio (from title) | 2.73 Down |
Vehicle fitment
The RD187 fits AMC 20 axles with 29 splines in front or rear positions. Compare your vehicle’s year, model and trim with this part before buying.
The 2.73 Down ratio is a different gearing choice from the 3.08 Up version, RD186. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Engagement needs an ARB onboard air compressor and air lines routed to the differential. Installing an air locker means removing the axle cover and disassembling the differential, so a qualified technician should handle it. Test engagement and release on level ground once the air supply is connected.
What’s included
Compare the package contents with your installation plan before starting.
Not included: ARB onboard air compressor and air lines.








