Select your vehicle
-13%

AirLift 1000 Replace Air Bag – 60330

AirLift

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement polyurethane air cylinder for the 60830 air spring kit
  • Operating pressure range 5 to 50 PSI
  • Fits 2020–2026 Jeep Gladiator models
  • No air line, hardware or fittings included
  • Part number AIR60330

Description

Overview

The AirLift 1000 replacement air bag, part number AIR60330, is a polyurethane air cylinder that replaces the bag in the 60830 air spring kit. It fits 2020–2026 Jeep Gladiator models in the Launch Edition, Overland, Rubicon, Sport and Sport S trims.

The cylinder operates at an air pressure range of 5 to 50 PSI and is designed as a replacement for an air spring that has failed or been damaged. The bag is sold alone, so the air line, hardware and fittings are not included and must be ordered or reused separately.

Key features

  • Polyurethane air cylinder
  • Replacement bag for the 60830 kit
  • Operating pressure range of 5 to 50 PSI
  • Direct fit for the listed Gladiator trims

Air spring replacement basics

Air springs carry load and set ride height, so a failed bag often shows up as a sagging corner or a rough ride on one side. Before replacing, check the rest of the air system for leaks, since a new bag will not hold pressure if the valves, lines or fittings are worn.

Replacing the cylinder is mainly a matter of matching mounts, fittings and fill lines. Use the same type of fittings on the new cylinder, and keep the lines clear of heat and sharp edges. After installation, check for leaks at each fitting and recheck the ride height once the truck has been driven.

  • Check the air system for leaks before replacing
  • Match mounts and fittings to the old bag
  • Recheck ride height after the first drive

Specifications

Brand AirLift
Part number AIR60330
Product type Replacement air bag
Material Polyurethane
Pressure range 5-50 PSI
Included Air cylinder only; no air line, hardware or fittings
Fitment Direct fit

Vehicle fitment

It fits the 2020–2026 Jeep Gladiator across its Launch Edition, Overland, Rubicon, Sport and Sport S models. It is intended for the 60830 air spring kit.

The list covers the Gladiator from 2020 to 2026 only, so the Wrangler and earlier Gladiator years are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the air line, hardware and fittings are not included, check the existing fittings on your air spring kit and order any missing parts before installing the new bag.

What’s included

One replacement air cylinder, part number AIR60330. Air line, hardware and fittings are not included.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–2026Launch Edition, Overland, Rubicon, Sport, Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the AirLift AIR60330 fit a 2019 Jeep Gladiator?

No. The fitment for this replacement bag covers the 2020 to 2026 Jeep Gladiator only. Confirm your vehicle's year, model and trim before ordering.

Does the kit include the air line and fittings?

No. AirLift says no air line, hardware or fittings are included with this replacement air cylinder. Check the fittings on your existing kit before ordering.

What pressure range does it operate at?

The cylinder operates between 5 and 50 PSI. It is made of polyurethane and is designed as a replacement for the air bag in the 60830 kit.

Is it a front or rear air bag?

Confirm whether the cylinder goes front or rear by matching it to the kit you are replacing before ordering. Compare the mounting points and fittings on the old spring as you do.

How can you tell an air spring needs replacing?

Look for a corner that sags after the truck sits, a hissing sound at the bag, or bubbles at the fittings during a soapy-water leak check. A bag that will not hold pressure usually needs replacing.

Should both air springs be replaced at once?

Replacing both springs on the same axle keeps the ride level side to side. If one bag is worn, the other is often close to failing, so checking both during the job is practical.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon