Overview
The AirLift LoadLifter 5000 57289 is a rear leaf spring leveling kit that AirLift describes as its heaviest rated air spring kit. It is engineered for a specific vehicle rather than a one-size-fits-all design, and no vehicle years, makes or models are named.
It gives a factory look and performance with minimal drilling and no welding. Its design aims to improve braking and steering, reduce sway, and limit bottoming out. Plan for minimal drilling rather than a completely drill-free install.
Key features
- Engineered to fit a specific vehicle
- Rear position
- Minimal drilling and no welding
- Rated by AirLift as its heaviest air spring kit
- Installation time of 2 hours or less
Before you install
Leaf spring leveling kits add rear support so the body sits closer to level when the truck carries weight. Air springs work alongside the leaf pack, so the kit’s load rating and the condition of the leaf pack both matter. Before fitting anything, look over the leaves, shackles, bushings and bump stops, since worn parts can change how the springs seat against new hardware.
Air-based systems depend on sealed fittings and clean air lines. Route the lines away from heat, sharp edges and moving parts, and leave some slack so the springs can flex. Once the system is running, check each bag fitting for leaks with soapy water and recheck after the first few drives, because mounting hardware can settle as it seats.
- Look for cracked or flattened bellows
- Check line routing and clamps
- Inspect rear shackles and bushings
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57289 |
| UPC | 729199572890 |
| Product line | LoadLifter 5000 |
| Position | Rear |
| Drilling | Minimal drilling, no welding |
| Installation time | 2 hours or less |
| Fitment | Direct Fit |
Vehicle fitment
The kit is engineered for a particular vehicle and carries a Direct Fit rating. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minimal drilling is part of the install, so check mounting locations and clearance before starting. The springs carry heavy load, so release air pressure before disconnecting any fitting.
What’s included
Count the kit components on arrival and match them against your installation plan before starting.
















