Overview
AirLift’s LoadLifter 5000 leaf spring leveling kit, part number AIR57395, is a rear air spring kit for vehicles with underframe mounting. The air springs support up to 5000 lbs of leveling capacity and set between 5 and 100 psi.
The kit uses two-ply fabric reinforced air springs with reinforced bellows. Fittings are polymer quick connect types for simple hookup.
Key features
- Up to 5000 lbs of leveling capacity
- Designed for vehicles with underframe mounting
- Two-ply fabric air springs
- Quick connect polymer air fittings
- Reinforced bellows for long-lasting strength
- Illustrated, vehicle-specific installation manuals
- Limited lifetime warranty
Checking underframe mounting
Underframe mounting means the air springs attach to the frame rather than only to the axle or leaf packs. Because the mounting points set where the springs sit, the frame must be sound and free of rust or damage before any load is placed on the kit. Measure and mark the points before fastening anything.
Once mounted, air springs should sit straight and not rub the frame or axle at full compression or extension. Check the clearance with the vehicle on level ground, both loaded and unloaded. Keep the air lines away from heat sources and the exhaust, and secure them with clips rather than letting them hang.
- Confirm the frame is free of rust at mount points
- Check spring clearance at full travel
- Secure air lines with clips
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR57395 |
| UPC | 729199573958 |
| Application | Rear |
| Mounting | Underframe mounting vehicles |
| System type | Air bag |
| Leveling capacity | Up to 5000 lbs |
| Air pressure range | 5 to 100 psi |
| Installation time | 3 (listed without a unit) |
| Warranty | Limited lifetime |
Vehicle fitment
The underframe mounting requirement narrows which vehicles it suits, so confirm your frame and mounting points before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation time is shown as 3 without a unit, so check the illustrated manual for the actual time. Confirm the mounting points match the underframe setup before starting the install.
What’s included
Air springs, quick connect polymer fittings and illustrated installation manuals are part of the kit.









