Overview
The AirLift Air Lift 1000 Universal Air Spring Kit, part number 60911, is an air spring kit with 1000 lbs of leveling capacity. It has a 4 in. diameter and a 10.00 in. overall length and is universal fit.
Air spring kit basics
An air spring kit supports load at one corner of the suspension and can be inflated or deflated to change height. The leveling capacity tells you how much weight the springs are meant to help carry, so compare it with the load you plan to carry before fitting. Heavier loads demand more capacity and careful installation.
Routing matters. Air lines should follow the frame or suspension without rubbing, pinching or sitting close to exhaust heat. Use the supplied fittings and check each connection for leaks with a soapy water test once the system is pressurized.
Over time, rubber bellows can crack or abrade where they rub. Look at the sleeve regularly, especially after rough off-road use, and replace a spring that shows cracks, bulges or repeated air loss.
- Check line routing for rub points
- Test every fitting for leaks
- Compare capacity with planned loads
- Inspect bellows after rough trails
Specifications
| Brand | AirLift |
|---|---|
| Part number | 60911 |
| UPC | 729199609114 |
| Diameter | 4 in. |
| Overall length | 10.00 in. |
| Leveling capacity | 1000 lbs |
Vehicle fitment
No vehicle is named for this kit. Check that the 4 in. diameter and 10.00 in. overall length suit your mounting space before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your mounting space against the 10.00 in. overall length and 4 in. diameter before installing. Plan the install around those dimensions.









