Overview
The AEM Cold Air Intake System 41-1101P is a cold air intake from AEM with a partial enclosure filter housing, part number 41-1101P. It pairs an aluminum intake tube with a polished finish and a dry filter in a black steel housing. AEM estimates a 16.6 HP gain for this kit, and it is legal for use in 49 states.
AEM designs its intakes around R&D testing and quality-first manufacturing. The kit includes complete hardware, a steel heat shield and reinforced brackets, and it carries a lifetime guarantee from AEM. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Estimated 16.6 HP gain.
- Partial enclosure dry filter housing in black steel.
- Polished aluminum intake tube.
- Complete hardware included in every kit.
- Steel heat shield and reinforced brackets.
- Legal for use in 49 states.
- Lifetime guarantee from AEM.
Things to check before installing
Heat shield clearance matters more than most people expect. Set the steel shield so it sits between the housing and hot engine parts without touching belts, hoses or moving linkage. A shield that is bent or shifted can change where the housing sits, so confirm the position before tightening the final fasteners.
Polished aluminum tubes show fingerprints and road grime quickly. A soft cloth and a mild cleaner keep the finish clean, while abrasive pads can leave fine scratches. Dry filters should be cleaned with the cleaner made for that media, and oil should be kept away from them. Check the tube for dents after any off-road trip, since a dented tube can restrict airflow.
- Confirm the housing clears the engine bay before starting it
- Check that all clamps and brackets are snug
- Keep the filter dry and clean between service intervals
Specifications
| Brand | AEM |
|---|---|
| Part number | 41-1101P |
| UPC | 24844291394 |
| Filter housing type | Partial enclosure |
| Filter housing material | Steel |
| Filter housing finish | Black |
| Filter type | Dry |
| Intake tube material | Aluminum |
| Intake tube finish | Polished |
| Inlet tube | Included |
| Estimated power gain | 16.6 HP |
| State legal | 49 states |
| Intake type | Cold air |
| Fitment | Direct Fit |
Vehicle fitment
Fit has not been confirmed for part number 41-1101P for any make, model or year. Confirm fit for your vehicle’s year, model, engine and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a steel heat shield and reinforced brackets, so mounting the shield and housing is the main job. Confirm the heat shield and housing clear hot engine parts and moving components before starting the engine.
What’s included
The kit includes the polished aluminum intake tube, a dry filter in the black steel partial enclosure housing, the steel heat shield, reinforced brackets and complete hardware.









