Overview
The Rigid Industries A-Series LED Light, part number 482043, is a compact universal accessory light for adding bright task lighting where a vehicle or boat is otherwise dark. Rigid positions it for vehicle cabs, boat cabins, work vehicle beds, the area under the hood and trunks.
The durable aluminum housing is small and lightweight, and the light is waterproof. It comes in a variety of LED colors and in high and low power versions. Mounting choices are a rubber flat-mount, a 3M VHB two-way pad, or radius tube-mount adapters that bring the wire out the side or the bottom. Because it is not built for one vehicle, the right setup depends on where you plan to mount it.
Key features
- Compact aluminum housing that is durable
- Lightweight and waterproof construction
- Available in a variety of LED colors
- High and low power versions
- Rubber flat-mount and 3M VHB two-way pad for flat mounting
- Radius tube-mount adapters with side or bottom wire exits
Wiring and fusing
Power for an accessory light should come from a switched, fused circuit. Place the fuse close to the power source so a fault in the cable is protected along its full length. A switch on the dash or console makes it easy to turn the light on only when needed, and it keeps the lamp from drawing power while the vehicle or boat is parked.
Route the cable with clips and keep it away from moving parts, exhaust areas and sharp edges. Where the wire passes through sheet metal, use a grommet. Check the connections after a few trips, since vibration can loosen terminals on any accessory light.
- Fuse close to the power source
- Use grommets where wire passes through metal
- Check terminals after the first few trips
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 482043 |
| UPC | 849774018725 |
| Product type | A-Series LED accessory light |
| Housing | Compact aluminum |
| Power versions | High and low |
| Mounting | Rubber flat-mount, 3M VHB 2 way pad, radius tube-mount adapters |
| Wire exit | Side or bottom, through the tube-mount adapters |
| Fitment | Universal Fit |
Vehicle fitment
This is a universal accessory light and is not vehicle-specific. Any vehicle or boat with a suitable mounting spot can use it, so the question to settle is where the light will sit and how the wire will run.
Measure the mounting spot and plan the wire route before you start. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Flat mounting uses the rubber flat-mount or the 3M VHB two-way pad. Choose the radius tube-mount adapters when you want the wire to exit from the side or the bottom. Clean the mounting surface before applying the adhesive pad, and fuse the wiring close to the power source, keeping it clear of moving parts.
What’s included
The A-Series package includes a rubber flat-mount, a 3M VHB 2 way pad for flat mounting, and radius tube-mount adapters that give side or bottom wire exits.
Not included: Check the wiring and power switch needs against your installation before starting.









