Overview
The Pro Comp 7031 is a push-in bolt for wheels in the 7031 style. It is a wheel accessory, and the title identifies the wheel style it is made for.
Check the finish against the wheel before fitting the bolt.
Key features
- Push-in bolt design
- Made for 7031 style wheels
Push-in bolts and wheel care
A push-in bolt is pressed into a wheel hole rather than threaded, so it relies on a snug fit and a clean seat. It is a small accessory, but its appearance is noticeable, so the finish should match the rest of the wheel. Before pressing one in, check the hole for debris, paint buildup, or a burr that could keep the bolt from seating square.
Clean the bolt and the hole with a soft brush and mild cleaner, then dry them before fitting. Avoid tapping the bolt in at an angle, which can scratch the finish and leave it standing proud. Check the bolts again after a few drives, since a loose push-in bolt can rattle and wear the hole.
- Clean the hole before pressing in the bolt
- Seat the bolt square
- Recheck it after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| UPC | 844658016682 |
| Wheel style | 7031 |
| Style | Push-in bolt |
Vehicle fitment
Confirm the bolt matches your wheel style and mounting before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One push-in bolt for 7031 style wheels.









