Jeep CJ3 Exterior Parts & Car Care
25 exterior parts & car care listed for the 1959–1966 Jeep CJ3
Every part on this page is listed by its maker for this model; the most represented brands are Crown Automotive, Omix-Ada and Rugged Ridge. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 25 resultsSorted by popularity
-
Fender Flares
Omix-ADA Front Passenger Side Fender Flare – 11601.02
- Replacement front passenger side flare, Omix-Ada part 11601.02
- Fits CJ-3, CJ-5, CJ-6, CJ-7 and Scrambler models, 1955–1986
- Thermoplastic, UV-treated, direct fit
- Mounts in factory holes, with hole relocation possible on some models
- Single flare, not a kit
SKU: OAI11601.02 -
Hood Latch Assembly
Kentrol Hood Catches (Stainless Steel) – 30401
- Fits 1959–1986 Jeep CJ models and 1987–1995 Jeep Wrangler YJ
- 304 stainless steel hood catches with a mirror-like finish
- Replaces factory hood catches; sold as a pair
- Complete stainless steel hardware included; part number 30401
SKU: KEN30401 -
Fender Flares
Crown Automotive Fender Flare Set (Paintable) – J8997109
- Four-piece fender flare set for Jeep CJ and Scrambler models, front and rear
- Includes mounting hardware; width and coverage are stock
- Paintable, part number J8997109, UPC 848399072891
- Fitment list runs from 1955 to 1986
SKU: CROJ8997109 -
Fender Flares
Crown Automotive Factory-Style Replacement Fender Flare (Paintable) – J5455074
- Factory-style plastic replacement flare for the passenger side rear of the CJ and Scrambler models
- Textured finish, flare only, sold individually
- Stock width and tire coverage
- Part number J5455074, UPC 848399065503
SKU: CROJ5455074 -
Fender Flares
Crown Automotive Replacement Fender Flare (Paintable) – J5455072
- Black passenger side front fender flare, flare only, for the CJ and Scrambler models covered below
- Stock width and coverage, sold one at a time
- Paintable, part number J5455072, UPC 848399065480
- Fitment list runs from 1955 to 1986
SKU: CROJ5455072 -
Fender Flares
Crown Automotive Replacement Fender Flare (Paintable) – J5455071
- Driver side front fender flare, flare only, for the Jeep CJ and Scrambler models covered below
- Sold individually, with stock width and tire coverage
- Paintable, part number J5455071, UPC 848399065473
- Fitment list runs from 1955 to 1986
SKU: CROJ5455071 -
-
-
-
-
Hood Latch Assembly
Rugged Ridge Hood Catch (Stainless Steel) – 11116.03
- Rugged Ridge 11116.03 polished 304 stainless steel hood catch
- Direct-fit, non-locking replacement for Jeep CJ, Willys CJ and 1987 to 1995 Wrangler YJ hoods
- Bolt-on installation with basic hand tools
- Two catches needed per hood; this item is one catch
SKU: RUG11116.03 -
-
Grille Inserts
Rugged Ridge Bug Screen (Stainless Steel) – 11106.01
- Rugged Ridge 11106.01 stainless steel radiator bug screen
- Fits Jeep CJ-3, CJ-5, CJ-6, CJ-7 and Scrambler models, 1955–1986
- Perforated screen with soft rubber edging
- All mounting hardware included
- Installation requires some drilling
SKU: RUG11106.01 -
-
-
Windshield Wiper & Washer
Omix-ADA Windshield Wiper Motor Kit – 19101.03
- Omix-ADA 19101.03 12-volt stainless steel windshield wiper motor kit
- Fits Jeep CJ, DJ, FC, J-series, Wagoneer (SJ) and Willys models
- Manufacturer list runs from 1941–1942 Willys MB through 1967 Jeep models
- Five year limited warranty from Omix-ADA
SKU: OAI19101.03 -
Hood Latch Assembly
Crown Automotive Black Hood Catch Set (Black) – 488601
- Crown Automotive Black Hood Catch Set, part number 488601
- Non-locking hood catches, sold as a pair
- Black powdercoated finish, Direct Fit listing
- Fitment list covers Jeep CJ, Scrambler, Willys and 1987-1995 Wrangler YJ
SKU: CRO488601 -
Hood Latch Assembly
Rugged Ridge Hood to Windshield Hold Down Catch Kit (Black) – 11210.02
- Rugged Ridge 11210.02 black hood to windshield hold down catch kit
- Fits 1959 to 1960 Jeep CJ3, CJ5 and CJ6, plus Willys CJ-2 through CJ-6
- Pair of hooks and catches with mounting hardware included
- Black semi-gloss finish with a vertical mount
SKU: RUG11210.02 -
Replacement Hoods
Omix-ADA Hood – DMC-681334
- Stamped steel reproduction hood, part DMC-681334
- Fits 1959–1960 CJ3 Base and 1954–1958 Willys CJ-3 models
- WILLYS script on the side of the hood
- Authorized and licensed Daimler-Chrysler reproduction
- Limited five-year manufacturer warranty
SKU: OAIDMC-681334 -
Replacement Steel Fenders
Omix-ADA Replacement Steel Fender – 12004.04
- Passenger side, front right replacement steel fender for Jeep CJ3 and Willys CJ-3 models
- Built to original specifications by Omix-Ada, with primer for rust prevention
- Listed fitment covers 1959–1960 CJ3 and 1949–1958 Willys CJ-3
- Part number 12004.04, UPC 804314147068
SKU: OAI12004.04 -
Windshield Clamp And Hook
Omix-ADA Windshield Clamp and Hook Kit – 12021.04
- Windshield clamp and hook kit, sold individually, part number 12021.04
- Fits 1959 Jeep CJ3 Base, 1943–1949 Willys CJ-2 and 1949–1958 Willys CJ-3
- Direct OE replacement Jeep part built to original specifications
SKU: OAI12021.04
