Overview
The Rugged Ridge 11210.04 is a black powder coated hood catch in a factory style, designed for the Jeep CJ line and the 1987 to 1995 Wrangler YJ. Rugged Ridge built it as a direct replacement for the original catch, which can degrade and fail after years of use. It is a single catch, and the hood bracket is not included.
The catch uses a bolt-on installation with basic hand tools, and it mounts at the same points as the factory hardware. The hood bracket is not supplied, so reuse the existing bracket or replace it separately.
Key features
- Factory style shape for a direct fit
- Black powder coat finish intended to resist rust and corrosion
- Bolt-on installation with basic hand tools
- Covers several CJ models and the Wrangler YJ
Working with a factory bracket
The hood bracket takes the hood’s position and the catch’s load, so it deserves the same inspection as the catch. Check for bent steel, cracked welds and enlarged bolt holes. A bracket that has shifted can hold the hood a little off line even with a new catch, so align the hood before tightening the final fasteners.
Factory style catches generally work with the original geometry, which makes them practical on older bodies. Before reusing a bracket, clean it, treat any surface rust and check that its bolts run freely. If the bracket is worn, replacing it separately is a sensible step.
- Check for bent steel and cracked welds
- Align the hood before final tightening
- Clean and treat surface rust
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11210.04 |
| UPC | 804314146559 |
| Finish | Black powder coat |
| Style | Factory style |
| Fit type | Direct fit |
| Quantity | Single catch |
| Hood bracket | Not included |
Vehicle fitment
It fits the 1959 to 1960 and 1966 Jeep CJ3 (Base); the 1959 to 1960 and 1966 to 1983 Jeep CJ5; the 1959 to 1960 and 1966 to 1975 Jeep CJ6; the 1976 to 1986 Jeep CJ7; the 1981 to 1985 Jeep Scrambler; the Willys CJ-2 (1946 to 1949), CJ-3 (1949 to 1958), CJ-5 (1955 to 1958) and CJ-6 (1956 to 1958); and the 1987 to 1995 Jeep Wrangler (YJ).
Check your vehicle’s year, model and trim against this fit before ordering. Wrangler TJ, LJ, JK and JL models are not among the covered models.
Installation notes
Inspect the hood bracket for wear before mounting the new catch, because the bracket is not supplied with it.
What’s included
One black factory style hood catch.
Not included: the hood bracket.









