Overview
The Pro Comp Suspension yellow shock boot, part number 10129, is a protective cover for the piston rod of a shock absorber. It shields the chrome-hardened rod from dirt, dust, mud and other contaminants, which helps keep the rod and seal in good condition.
The yellow version is sold in bulk packaging. Measure your shock’s exposed piston rod and compare it with the boot’s length and diameter before ordering.
Key features
- Protects the chrome-hardened piston rod from dirt, dust, mud and other contaminants
- Yellow color
- Bulk packaging
Shock boot basics
A shock boot is a flexible cover that fits over the exposed piston rod of a shock absorber. Dirt, mud and sand that cling to the rod are pulled inside by each stroke, and they can scratch the chrome surface and damage the seal where the rod enters the shock body. A boot blocks much of that material, so the seal lasts longer and the shock keeps working smoothly.
Boots wear in use. Repeated flexing can crack the material, and rocks or branches can tear it, so check the boot for splits or a loose fit at each service. When changing a boot, clean the rod first so no grit is carried under the new boot, and slide it into place without bending it sharply. A torn boot should be replaced promptly rather than taped, since tape does not seal against the rod.
- Clean the rod before fitting
- Check for splits after trail use
- Replace torn boots rather than taping them
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 10129 |
| UPC | 614901020236 |
| Color | Yellow |
| Packaging | Bulk |
Vehicle fitment
Confirm fit for your shock’s piston rod diameter and body length before ordering. Compare the boot with the shock models you plan to fit.
What’s included
This is sold in bulk packaging. Check the package count against your needs before buying.









