Overview
The Westin 09-12252A is a universal fit LED light. Mounting hardware is included, and it is not built for a particular vehicle.
Westin describes its circuitry as engineered in-house, aiming for stronger output with lower heat generation. Inside each housing, heat sinks are intended to hold temperatures to a minimum, letting the LEDs stay cooler and brighter.
The housing is powder-coated and has a custom-molded rubber seal. The lens is scratch resistant and built to resist breakage.
Key features
- In-house circuitry for stronger output and lower heat
- Heat sinks for cooler LEDs
- Powder-coated housing
- Custom-molded rubber seal
- Scratch-resistant lens designed to resist breakage
- Mounting hardware included
Choosing a mounting spot
The spot you pick sets how far the light throws and how much it is exposed to road debris. Look for a surface that is solid enough to hold the bracket without flexing, and leave room for the housing and the cable. Test the fit with the light held in place before drilling anything. Lights that sit low pick up mud and water, so mounting higher usually keeps the lens cleaner.
Wiring is usually the part that takes the most planning. Run the feed through a fuse near the battery, then through a relay controlled by a switch. Keep the cable away from sharp edges, moving linkages and exhaust heat, and secure it with clips at regular intervals.
- Measure the housing before choosing the spot
- Confirm the bracket matches the mounting surface
- Keep the rubber seal clean and undamaged
Specifications
| Brand | Westin |
|---|---|
| Part number | 09-12252A |
| UPC | 707742060476 |
| Product type | LED light |
| Housing finish | Powder-coat |
| Seal | Custom-molded rubber |
| Lens | Scratch resistant, resists breakage |
| Included | Mounting hardware |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is what Westin lists here, so no particular year, make or model applies. Choose a mounting location with room for the housing before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Supplied hardware handles the mounting. Lighting circuits are normally protected by a fuse and switched through a relay, so plan those parts for your install and follow local rules on auxiliary lights.
What’s included
Westin LED light 09-12252A with mounting hardware.
Not included: Harness, switch and relay are needed separately if your install requires them.









