Overview
The Welcome Distributing 1001R is a pair of solid steel interior grab handles for getting in and out of a Jeep without reaching for the steering wheel or seats. The handles are universal fit, so they suit Wrangler owners who want a fixed handhold at the front of the cabin.
Each bar is 3/4-inch solid steel and bolts through existing holes in the vehicle with grade 12.9 bolts. The install takes about 10 minutes, with no drilling and no dismantling of the interior. The handles also give a firm hold when going down a trail.
Key features
- Red rubber grips for a firm hand hold
- Solid 3/4-inch steel handle construction
- Bolts into existing holes, no drilling required
- Install takes about 10 minutes
- Sold as a pair, one bar per side
- Limited Lifetime Warranty from Welcome Distributing
- Made in the USA
Front grab handle install tips
Front grab bars take regular use: you grab them to pull up, to steady yourself on steps, and to brace on uneven ground. Because they mount through existing holes, the load goes straight into the body structure around those points, so the fastener condition matters more than the bar itself. Rough surfaces can put sharp side loads on a handle, so push and pull along the bar rather than off to one side. Before each trail trip, take a moment to check that nothing has shifted or worked loose.
If you plan to add a second set of handles or other interior grab points, check the spacing of holes and the clearance around the dash and seat belts first. Keep wiring and airbag areas clear, and do not drill new holes into trim panels. Bolts that are reused or replaced should match the grade called for in the install.
Specifications
| Brand | Welcome Distributing |
|---|---|
| Model | 1001R |
| UPC | 857131005158 |
| Grip color | Red rubber |
| Material | Solid steel, 3/4 inch |
| Bolt grade | Grade 12.9 |
| Mounting | Existing holes, no drilling |
| Position | Front |
| Quantity | Sold as a pair |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
No model years or chassis codes apply to these handles, so they are not tied to one Jeep generation. They are universal fit and suit Wrangler owners in general. Compare the fit with your year, model and trim before ordering.
Before buying, check that your vehicle has the mounting holes the bars use and compare them with the install description. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the holes on your vehicle line up with the bars before starting, since each handle relies on existing holes. The install takes about 10 minutes and skips drilling. Tighten every fastener fully before anyone puts weight on a handle.
What’s included
Sold as a pair, so the order covers two front grab handles with red rubber grips.




















