Overview
The Welcome Distributing 1003O is a set of front and rear GraBars, solid-mounted interior grab handles with orange rubber grips for the 2007–2016 Jeep Wrangler (JK). The handles help you get in and out of the vehicle and give you something solid to hold while going down a trail, so you are not relying only on the steering wheel or the seats.
Each GraBar is made from solid 3/4 inch steel and bolts into existing holes using grade 12.9 bolts. Welcome Distributing sells the GraBars as a kit of four, which covers the front and rear positions. Installation requires no drilling and no dismantling of the interior, and the install takes about 10 minutes.
The handles come with orange rubber grips as part of the design. They are made in the U.S.A. and carry a Limited Lifetime Warranty.
Key features
- Solid 3/4 inch steel construction
- Orange rubber grips
- Grade 12.9 bolts fasten into existing holes
- No drilling needed to install
- Kit of four GraBars for front and rear positions
- Made in the U.S.A.
- Limited Lifetime Warranty
Trail use and grip care
Orange grips make the handles easy to find in low light or when dirt and mud cover the interior. On a Wrangler, the front bars are usually the ones a driver or passenger reaches for when climbing up, while rear bars help people seated in back when the vehicle tilts on uneven ground.
Rubber grips take the most wear from sun and cleaning products. Wipe them with mild soap and water, and avoid harsh solvents that can dry the rubber. A grip that feels hard, cracked or loose on its sleeve should be replaced before it fails under load.
When fitting handles beside a soft top or half doors, check that the bar does not catch fabric, mirrors or seatbelts when it is used. A quick test with the seatbelt fastened can show whether a bar clears the buckle path.
- Clean grips with mild soap and water
- Look for cracks or loose sleeves
- Recheck mounting bolts after rough trails
Specifications
| Brand | Welcome Distributing |
|---|---|
| Part number | 1003O |
| UPC | 70000774996 |
| Position | Front and Rear |
| Color | Orange |
| Grip | Orange rubber |
| Material | Solid steel, 3/4 inch |
| Fasteners | Grade 12.9 bolts |
| Kit contents | 4 GraBars |
| Warranty | Limited Lifetime Warranty |
| Origin | Made in the U.S.A. |
Vehicle fitment
The manufacturer fitment list covers the 2007–2016 Jeep Wrangler (JK) in the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X versions.
It fits 2007–2016 Jeep Wrangler (JK) models, including Unlimited trims. Wrangler TJ, LJ and JL models fall outside that range. Check your body style and trim before buying.
Installation notes
Each GraBar bolts into existing holes with grade 12.9 bolts, so no drilling is needed. Tighten every bolt fully and test each handle for firm movement before relying on it to support your weight.
What’s included
A kit of four GraBars with orange rubber grips, sold for the front and rear positions.
Not included: check the package contents against your installation before starting.












