Overview
The Weigh Safe LTB10-2 is a 10 inch drop hitch ball mount with a 2 inch shank for the 180 Hitch. It is an adjustable mount built from 6061 T6 aluminum and stainless steel components for heavy duty towing.
A drop mount lowers the ball below the shank, so a trailer can ride level when the receiver sits higher than the coupler. The design gives towing a more level, steady setup.
Key features
- 10 inch drop height
- 2 inch shank
- Adjustable ball mount
- Designed for the 180 Hitch
- 6061 T6 aluminum and stainless steel components
- Designed for heavy duty use
- Made in the USA
Drop mount setup and care
A drop mount places the ball below the shank height, which helps a trailer sit closer to level when the receiver is higher than the coupler. The aluminum body keeps weight down, but the mount still carries heavy loads, so its pins, welds and bolts need regular checks. Fit the shank fully into the receiver before you add any load.
Stainless steel components resist corrosion at the hardware and pin points, which matters in wet or salted conditions. Keep the adjustable sleeve free of grit, and apply a light lubricant to moving parts so the mount height can be changed without binding.
- Check pin and clip engagement before each trip
- Inspect welds and bolts for cracks
- Retighten hardware after the first loaded tow
Specifications
| Brand | Weigh Safe Hitches |
|---|---|
| Model | LTB10-2 |
| UPC | 653863202182 |
| Drop | 10 inch |
| Shank size | 2 inch |
| Material | 6061 T6 aluminum and stainless steel |
| Compatibility | 180 Hitch |
| Origin | Made in the USA |
Vehicle fitment
The mount is made for the 180 Hitch, so match its 2 inch shank and 10 inch drop to your receiver and trailer before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 2 inch shank has to match the opening of your receiver. The 10 inch drop is meant to help the trailer ride level once hitched.
What’s included
No accessories are included with the mount. Not included: a hitch receiver and a trailer ball, which must be supplied separately.









