Overview
The Warrior LED Light Kit, part number 2917, is a set of flush-mounted LED rear lights: two 4 inch red stop, turn and tail lights plus two 2 inch white reverse lights. It is universal fit, with no vehicle year, make or model named.
The kit is intended for use with LED cutout rear corners. All lights in the kit are American-made and carry a lifetime warranty.
Key features
- Two flush-mounted 4 inch red stop, turn and tail lights
- Two 2 inch white reverse lights
- American-made lights.
- Lifetime warranty.
- Recommended with LED cutout rear corners
Flush mounting basics
Flush-mounted lights sit close to the body panel, so the mounting surface and the cutout around them decide how clean the rear looks. Before cutting or drilling, mark the lamp outline, check for hidden wiring and fuel lines behind the panel, and confirm there is room for the light body. Fitting lights into a finished panel is far easier when the template is taped in place first.
Weatherproofing matters for flush lights because water can collect around the edge of the housing. Use a sealant rated for exterior use, and make sure the lamp sits flat without pulling the panel out of shape. Test every function once the wiring is connected, before the interior trim goes back on.
- Mark the lamp outline before cutting
- Check for hidden wires behind the panel
- Test all lights before reassembling trim
Specifications
| Brand | Warrior |
|---|---|
| Part number | 2917 |
| UPC | 63414602917 |
| Red lights | Two 4 inch stop, turn and tail lights |
| White lights | Two 2 inch reverse lights |
| Mounting | Flush-mounted |
| Origin | American-made |
| Warranty | Lifetime |
| Recommended use | LED cutout rear corners |
Vehicle fitment
The kit is universal fit and is not tied to one vehicle. Confirm the rear setup for your vehicle before ordering.
The kit is recommended with LED cutout rear corners, so check that setup for your vehicle before ordering.
Installation notes
Plan the mounting and wiring before cutting or drilling any panels.
What’s included
The kit contains two 4 inch red stop, turn and tail lights and two 2 inch white reverse lights.
Not included: The LED cutout rear corners, which Warrior recommends for use with the kit.









