Overview
The Omix-Ada 12403.11 is a driver side (left) replacement tail light for 1987–1990 Jeep Wrangler YJ models. It has a black housing, a side marker lens and a license plate lamp, so it covers more than the lamp lens alone.
Choose this part when the driver side needs a complete rear lamp rather than a single component. Use the position marking to confirm you have the driver side before fitting.
Key features
- Black housing for the driver side
- Side marker lens included
- License plate lamp included
- Direct fit listing for the YJ Wrangler
Replacing the rear lamp assembly
A tail light assembly on a YJ does more than show brake and turn signals. It carries the lamp circuits that your vehicle’s wiring harness supplies, and the connector and ground points at the body are where problems usually start. Before fitting a replacement, inspect the old plug for melted pins, green corrosion or brittle wire insulation. Clean the ground surface on the body so the lamp has a solid return path. Those steps take little time and prevent a dim or flickering lamp after installation.
Age matters too. Older YJ harnesses often have tired connectors, so a new lamp can expose faults that were hidden before. If the license plate lamp stays dark after a test, trace its ground wire first, since that is a common cause. Keep a small tube of dielectric grease on hand to seal the plug once everything tests correctly. Re-check the fasteners after the first few drives, because vibration on an older body can loosen the mounting nuts.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12403.11 |
| UPC | 804314235383 |
| Position | Left (driver side) |
| Housing color | Black |
| Included parts | Side marker lens, license plate lamp |
| Warranty | Limited five year warranty from Omix-Ada. |
Vehicle fitment
It fits 1987–1990 Jeep Wrangler (YJ) models, including Base, Islander, Laredo, S, Sahara and Sport trims.
Covered years end at 1990, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The license plate lamp is part of this assembly, so test that circuit after fitting the lamp to make sure it lights with the rear lighting switched on.
What’s included
One driver side tail light with black housing, side marker lens and license plate lamp.









