Overview
The Warn 71297 is a wire rope assembly sized at 1/4 inch by 60 feet, sold as a replacement part for Warn winches. Warn lists universal fit for it, so no single vehicle is named.
Warn asks buyers to supply the winch model number, battery voltage and serial number when ordering winch replacement parts. On planetary gear models, the serial number is printed on the gear end housing, which helps confirm the right rope for your unit.
Ordering the right winch line
A replacement winch line has to match the winch it runs on. Drum design, line capacity and end fittings all shape which rope will work, so the winch is the starting point. Before ordering, have the winch’s model number, battery voltage and serial number ready, since these identify the correct replacement parts for Warn winches.
Diameter and length are the two measurements that matter most for a rope swap. Measure the old line if it is still on the drum, or work out the length you need from the drum capacity. Keep the diameter the same as the original, because a thicker or thinner line may not seat correctly in the fairlead and drum grooves.
Handle the new rope with heavy gloves, keep hands clear of the drum while winding, and wind it under tension so the layers stack evenly. Once installed, inspect the first few feet at each end for kinks or loose strands.
- Winch model number
- Battery voltage
- Serial number and its location on the gear housing
Specifications
| Brand | Warn |
|---|---|
| Part number | 71297 |
| Diameter | 1/4 inch |
| Length | 60 feet |
| Type | Wire rope assembly |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is listed, with no year, make, model or trim named. The rope matches a Warn winch rather than a vehicle, so the winch details are the deciding factor.
Check the winch model number and serial number against Warn’s parts information before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The product is the 60-foot wire rope assembly, as titled.
Not included: The winch and any hardware needed to mount it are not part of this product.









