Overview
The Warn 16463 is a terminal kit sized for 5/16 inch wire rope, used with Warn winches. A terminal is the end fitting that secures the rope, so this kit is for rebuilding a 5/16 inch winch line.
The kit contents are not spelled out beyond the title, so check what arrives against the 5/16 inch rope size before fitting. Warn marks it universal fit, so select it by rope size and winch rather than by vehicle.
Key features
- Sized for 5/16 inch wire rope
- Universal fit, so choose it by rope size and winch model.
- Warn part number 16463
- Ordering requires the winch model number, battery voltage and serial number
Choosing a terminal kit
A wire rope terminal is the fitting that anchors the line to the drum and holds the load at the end of the rope. When a terminal is damaged, frayed or pulled loose, the line can slip under load, so replacing the end is part of rebuilding a winch line correctly. Decide whether the line needs a new end or a full replacement before you start, since a terminal only suits rope of the matching diameter.
Because this kit is matched by rope size and winch model rather than by vehicle, the sensible first step is to measure the existing line and confirm the winch model. Terminals are often replaced alongside the rope when the line shows broken strands or kinks near the end. Keep the old hardware for comparison, and inspect the new fitting for burrs or deformation before loading the winch.
- Measure the rope diameter before ordering
- Check the winch model number
- Inspect the drum end of the line for wear
- Replace the rope if strands are broken
Specifications
| Brand | Warn |
|---|---|
| Part number | 16463 |
| UPC | 12748164630 |
| Rope size | 5/16 inch wire rope |
| Fitment | Universal fit |
Vehicle fitment
This terminal kit is not vehicle-specific. Match it to the 5/16 inch rope and to your Warn winch’s model, not to a vehicle year or make.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before ordering, find your winch model number, battery voltage and serial number. On planetary gear models the serial number is on the gear end housing, while upright spur gear models (M8274) carry it on top of the winch housing.
What’s included
It is a terminal kit for 5/16 inch wire rope. Check the package contents against your installation before starting.
Not included: the wire rope itself, since this kit is a terminal for 5/16 inch rope.








