Overview
The Warn Elite Series front bumper with grille guard, part number 87750, is a black powder coated wrinkle finish bumper with a recessed winch mount, made from 3/16-inch steel plate. The grille guard is included.
The Elite Series suits overland trips and general exploring. The bumper wraps around the front end, tapers the ends for increased approach angles and sits the winch low in a recessed mount. Recessed ports and mounts hold auxiliary lights, which are sold separately, and recessed jack points allow a more stable jack position. Welded eyelets take D-shackles, and the mounting fasteners are hidden inside the bumper, keeping the finish clean.
Key features
- Includes the welded-on CNC-formed grille guard
- 3/16-inch steel plate with a black powder coated wrinkle finish
- Recessed winch mount accepts all WARN mid-frame winches of 12,000 lbs capacity and under, excluding the M8274-50
- Tapered ends for increased approach angles
- Welded eyelets for D-shackles
- Recessed light ports and mounts for auxiliary lights
- Recessed jack points for more stable jack positioning
- No drilling required
Choosing a winch and lights
A front bumper carries a winch and the loads it creates, so the mount and the bumper body share the strain. A winch sized within the mount’s rating helps keep the bumper stable under load. Recovery straps and D-shackles should be rated for the load, and the eyelets should be used in line with the pull.
Wire auxiliary lights through a fused relay and route the harness away from the winch line. Check the mount bolts and eyelets after heavy use, and touch up stone chips in the powder coat so bare steel does not start to rust. Check the grille guard clearance to the radiator and hood before final tightening.
- Match the winch to the mount’s rating
- Use D-shackles rated for the recovery load
- Fuse each auxiliary light circuit
- Touch up chips in the powder coat
Specifications
| Brand | Warn |
|---|---|
| Part number | 87750 |
| UPC | 12748877509 |
| Product | Front bumper with grille guard and winch mount |
| Series | Elite Series |
| Material | Steel plate, 3/16 in |
| Finish | Black powder coat, wrinkle texture |
| Width | Full |
| Body styles | 2 and 4-door models |
| Fit type | Direct fit |
| Winch capacity | WARN mid-frame winches up to 12,000 lbs, excluding M8274-50 |
| Grille guard | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
It is a direct-fit bumper for 2 and 4-door body styles. Confirm your vehicle’s year, model and trim before ordering.
The 2 and 4-door note is a body style, not a vehicle, so it cannot confirm that the bumper fits yours. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Warn states no drilling is required. Lights placed in the recessed ports should be powered through a fused relay.
What’s included
- Front bumper with recessed winch mount
- Grille guard
- Light mounts
- D-ring mounts
Not included: the winch and the auxiliary lights, which are sold separately.










































