Overview
The Crown Automotive 1157 bulb, part J3209544, is a replacement rear bulb for the rear turn signal, rear parking light and brake light. The manufacturer fitment shows it for the 1987–1995 Jeep Wrangler (YJ).
The 1157 designation is the bulb number on this part. One bulb serves three rear functions, so confirm which function your socket serves before ordering.
Key features
- Rear turn signal function
- Rear parking light function
- Brake light function
- Fitment shown for the 1987–1995 Jeep Wrangler (YJ)
Rear bulb care and checks
Rear lamp bulbs often work as a set: a brake light and turn signal share the same housing, so one failing bulb can leave the other side in doubt. Check each function after installation by having a helper press the brake pedal and operate the turn signal. Corroded sockets are a common cause of dim or intermittent rear lights, so clean the contacts before fitting the new bulb.
Bulbs that serve several functions often use a dual filament design, so the base and pins matter as much as the wattage. Look for a blackened or cracked glass envelope, a loose base or a flickering light as signs the bulb needs replacing. Avoid touching the glass with bare fingers, and seat the bulb fully before closing the lens.
- Test brake, turn and parking functions after fitting
- Clean socket contacts before installing a new bulb
- Replace a dimming bulb before it fails completely
- Check the lens seal to keep out water
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3209544 |
| UPC | 848399059342 |
| Bulb number | 1157 |
| Functions | Rear turn signal, rear parking light, brake light |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment shows the 1987–1995 Jeep Wrangler (YJ) with these trims: Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport.
Wrangler generations after 1995 and the Cherokee and Grand Cherokee models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Single bulb. Verify the package contents match your installation before starting.









