Overview
It is a clear, 12-volt sealed beam headlight for the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler. It is a direct fit replacement built to original Jeep specifications.
A sealed beam combines the lens, reflector and filament in one sealed unit, so the whole headlight is replaced when it fails. The limited five year warranty applies. It fits several trims for each vehicle, including Base, Golden Eagle, Laredo, Limited and Renegade, and the Scrambler also covers SL and SR.
Key features
- 12-volt sealed beam design
- Clear lens
- Direct fit replacement built to the original Jeep specifications
- Limited five year warranty
- Fits CJ5, CJ7 and Scrambler trims
Sealed beam care
A sealed beam is a complete unit, so when it fails the whole headlight comes out, and there is no bulb to swap. Before pulling the old unit, note which way the terminals face and how the aim screws sit, because the new one must seat the same way. Keep the old connector clean and dry, and check it for corrosion while it is apart.
Sealed beams age through lens haze and reflector wear as well as filament failure. A dim beam with a clear lens often points to a worn unit or a poor ground rather than the lens. Check the ground strap and battery connection before assuming the headlight itself is the problem.
- Note terminal orientation before removal
- Inspect the connector for corrosion
- Test the ground before replacing
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12409.01 |
| UPC | 804314041151 |
| Headlight type | Sealed beam |
| Voltage | 12-volt |
| Lens color | Clear |
| Fitment type | Direct fit |
| Warranty | Limited five year warranty |
Vehicle fitment
The manufacturer fitment list covers the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Vehicles outside these three entries are not covered by the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check headlight aim after replacing the unit. Disconnect the battery before working on the headlight wiring.
What’s included
One clear sealed beam headlight, part number 12409.01.
Not included: Mounting hardware and wiring are not included. Check the package contents before starting the installation.









