Overview
This Pro Comp Alloy Wheels valve stem is a black, high pressure, snap-in stem for TPMS valves only.
The valve stem is a wheel part, so it is matched to the wheel and sensor rather than a vehicle.
Key features
- High pressure rating
- Snap-in style
- TPMS valve only
- Black finish
Valve stem care and checks
A TPMS valve stem holds the tire’s air and is the point where the TPMS sensor is mounted on many wheels. Because the stem is exposed to road debris and moisture, it should be checked at tire service. Look for cracks in the rubber, corrosion at the base, and loose caps. Replace the stem if the seal leaks when the tire is aired up. Many shops replace the stem whenever a tire is remounted.
Snap-in stems are installed by pulling them through a hole in the wheel. Lubricate the rubber lightly with a soap solution, never oil, and seat the stem fully so the flange sits flat against the rim. Re-check tire pressure after the first drive, since an imperfect seat can leak slowly.
- Check for cracks and corrosion
- Replace stems that leak
- Use a soap solution, not oil
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| UPC | 844658031012 |
| Finish | Black |
| Style | Snap-in, TPMS valve only |
Vehicle fitment
Match the valve stem to your wheel and TPMS sensor before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One black snap-in valve stem.









