Overview
The Crown Automotive TPMS valve stem hardware kit, part number CRO68058766AA, is a hardware set for tire pressure monitoring valve stems and contains a valve stem, cap and screw. The title identifies it as 68058766AA.
Crown describes its catalog as replacement parts for Jeep vehicles, and this kit’s listed fitment also covers Dodge, Ram and Chrysler models from 2005 to 2019.
Key features
- Kit contains a valve stem, cap and screw
- TPMS valve stem hardware
- Direct Fit listing with year-by-year model entries
- Listed fitment spans 2005 through 2019 across Jeep, Dodge, Ram and Chrysler models
Valve stems and TPMS service
A TPMS valve stem sits in the wheel rim and carries the sensor’s signal path. Valve stems age from heat, road salt and repeated tire service, and rubber stems can seep air slowly. Replacing the stem is often easier while the tire is off the rim, so many shops change it during a tire job.
When a stem is replaced, clean the rim seat and the stem’s sealing surface first. Use a new cap and seal, and tighten the retaining nut gently, since overtightening can crack the stem. A sensor that is not seated correctly can read low or fail to report, so check pressure after mounting.
Sensor batteries have a limited life, so consider the sensor’s age before reusing it when the stem is changed. Keep your vehicle’s reset procedure handy, since some systems need a relearn after a stem or sensor change.
- Replace stems at tire service when they show wear
- Use new caps and seals
- Check tire pressure after mounting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO68058766AA |
| Title part number | 68058766AA |
| Kit contents | Valve stem, cap and screw |
| Fitment type | Direct Fit |
Vehicle fitment
This kit fits the Chrysler Aspen 2007-2009, Dodge Dakota 2008-2010, Dodge Durango 2007-2009 and 2011-2016, Dodge Journey 2011-2019, Dodge Nitro 2007-2011, Ram 1500 2008-2010 and 2011-2014, Ram 2500 2008-2009 and 2011-2012, Ram Dakota 2011, Jeep Commander (XK) 2007, Jeep Compass 2012-2017, Jeep Grand Cherokee (WK) 2005, 2007 and 2011-2017, Jeep Liberty (KJ) 2007, Jeep Liberty (KK) 2008-2011, Jeep Patriot 2012-2017, Jeep Wrangler (JK) 2007-2018, and Jeep Wrangler (JL) 2018-2019. Each entry also names trims, such as Rubicon and Sahara for the Wrangler JK.
Wrangler TJ and LJ models, Jeep Gladiator, and Jeep Cherokee are not on this list, and neither are 2020 and later Wrangler JL models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit contains a valve stem, cap and screw.
Not included: A TPMS sensor is not included in this kit.









