Overview
The Tuff Country 2.5 Inch Lift Kit, part number 22810, is a 2.5 inch suspension lift for 1981 to 1996 Ford Bronco and F-150 trucks and 1984 to 1990 Ford Bronco II models.
The kit includes front and rear axle pivot brackets, a radius arm bracket, a 4 inch block, U-bolts and a hardware bag. The added height gives fender clearance and room for larger tires. Tuff Country has made EZ-Ride suspension kits since 1988.
Key features
- 2.5 inch lift height
- Front and rear axle pivot brackets
- Radius arm bracket for axle location
- 4 inch block
- U-bolts and hardware bag included
Off-road use and axle location
Pivot brackets and radius arm brackets influence how the axle moves under load, so they are the parts to inspect most often. Off-road use puts side loads on the brackets and bushings that pavement driving never creates. Grease fittings, if fitted, should be serviced on a regular schedule, and any cracks around the bracket welds should be addressed promptly.
A block changes the axle position relative to the spring, which affects pinion angle and driveline vibration. Owners who plan to run larger tires often adjust gearing or tire size at the same time. Before ordering extra parts, measure the existing driveline angle and compare it to the new height so the changes stay in balance.
- Check bracket welds and mounting bolts after rough trails
- Watch for driveline vibration at highway speed
- Inspect U-bolts for shifting or cracking
- Replace worn bushings during the same service
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 22810 |
| UPC | 698815228100 |
| Lift height | 2.5 inch |
| Block | 4 inch |
| Included | Front and rear axle pivot brackets, radius arm bracket, hardware bag, U-bolts |
| Warranty | Limited lifetime, per manufacturer |
Vehicle fitment
The manufacturer fitment list covers the 1981–1996 Ford Bronco in Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport trims; the 1984–1990 Ford Bronco II in Base, Eddie Bauer, XL, XL Sport, XLS, XLT and XLT Plus trims; and the 1981–1996 Ford F-150 in Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat trims.
Ford Bronco and F-150 model years after 1996 and Ranger pickups are not on this list. Compare your year, body and trim with the entries above before fitting.
Installation notes
The axle pivot and radius arm brackets change how the axle is located, so check the alignment and driveline angles after the lift. Match the U-bolts and block to your axle before starting work.
What’s included
Front and rear axle pivot brackets, a radius arm bracket, a 4 inch block, U-bolts and a hardware bag are included.
Not included: Plan for shocks separately, since they are not part of this kit.
