Overview
The TruXedo Lo Pro QT, part number TRX548601, is a soft roll-up tonneau cover with a low profile and a removable design. It fits the 1997–2003 Ford F-150 in Base, Harley-Davidson Edition, Lariat, XL and XLT trims, the 2004 Ford F-150 Heritage (SVT Lightning) and the 1999–2003 Ford F-150 Lightning.
Owners who haul oversized cargo or ATVs can remove the cover and put it back on in about 5 minutes. The angled side rails sit less than 1 inch above the bed, and the aerodynamic shape can improve gas mileage.
Opening takes 20 seconds from fully closed to fully open, which gives complete access to the bed. Corner seals and a weather seal on all four sides help keep the elements out, and the cover is designed to work with most accessories such as bed rails, bed liners and rail caps.
Key features
- Angled side rails that stay less than 1 inch above the truck bed
- Removable design with reinstallation in about 5 minutes
- Velcro brand loop, 1 inch wide, fastening the entire length of the bed rail
- Floating hook that moves along the rail
- Tension control system keeps the cover tight, even when closed
- Exclusive corner seals and weather seal on all four sides
Fit and clearance checks
A low-profile bed cover sits close to the rails, so the space above it matters for anything you carry. Measure the height of loads you plan to haul, and remember that a bed rack or tall toolbox would need to clear the cover when it is rolled. Because this cover is not rack or toolbox compatible, plan your hauling around a clear bed.
Older F-150 bodies can have bed rails and tailgate hardware that differ from newer trucks. Look over the rails for bends or corrosion before fitting the cover, and make sure the Velcro loop sits flat along the full rail length. A snug, even fit helps the tension system keep the cover from flapping at highway speeds.
- Measure bed height against the loads you carry
- Inspect bed rails for bends or corrosion before fitting
- Confirm the cover sits flat on both sides once installed
Specifications
| Brand | TruXedo |
|---|---|
| Part number | TRX548601 |
| Material | Soft |
| Tonneau type | Roll-up |
| Operation | Manual |
| Side rail height | Less than 1 inch above the truck bed |
| Velcro loop width | 1 inch |
| Closed to open time | 20 seconds |
| Reinstall time | About 5 minutes |
| Rack compatible | No |
| Toolbox compatible | No |
| Fitment type | Direct fit |
Vehicle fitment
The list includes the 1997–2003 Ford F-150 in Base, Harley-Davidson Edition, Lariat, XL and XLT trims, the 2004 Ford F-150 Heritage (SVT Lightning) and the 1999–2003 Ford F-150 Lightning. Later F-150 model years and generations are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.
Not included: Rack or toolbox accessories, since the cover is not compatible with either.









