Overview
The TruXedo Lo Pro QT, part number TRX583601, is a soft roll-up tonneau cover for the 1998–2004 Nissan Frontier. It mounts on the bed rails with a low profile, and TruXedo describes its angled side rails as sitting less than 1 inch above the truck bed. The cover is operated by hand and is meant for owners who want a bed cover that is easy to remove.
Owners who need to clear the bed for oversized cargo or ATVs can remove the cover and reinstall it in about 5 minutes. The aerodynamic styling can improve gas mileage, and the cover works with common bed accessories such as bed rails, bed liners and rail caps.
Key features
- Angled side rails that sit less than 1 inch above the truck bed
- Velcro brand loop, 1 inch wide, fastens along the full length of the bed rail
- Velcro brand floating hook moves along the rail to hold the cover in place
- Tension control system keeps the cover tight, even when it is closed
- Opens from fully closed to fully open in 20 seconds for complete bed access
- Corner seals and a weather seal on all four sides help keep out the elements
- The fastening uses no snaps or adhesives.
Removing the cover for work
Bed covers that come off are often used by owners who switch between commuting and job duties. Removing the cover for oversized cargo or ATVs means handling it more often, so keep the fabric folded loosely and away from grease or fuel. Clean the cover when it comes off to keep grit from working into the seams.
The floating hook and Velcro loop carry the holding force, so their condition affects how the cover sits. Check the hook for smooth movement along the rail and look for any loose areas after the first few drives. Even seating along both sides helps the tension system keep the closed cover snug.
- Fold the cover loosely when it is off the truck
- Keep grease and fuel away from the fabric
- Recheck the seating after the first few drives
Specifications
| Brand | TruXedo |
|---|---|
| Part number | TRX583601 |
| Material | Soft |
| Tonneau type | Roll-up |
| Operation | Manual |
| Fitment type | Direct fit |
| Toolbox compatibility | Not toolbox compatible |
| Rack compatibility | Not rack compatible |
| Rail loop width | 1 inch |
| Open time | 20 seconds, fully closed to fully open |
| Reinstallation time | About 5 minutes |
Vehicle fitment
It fits the 1998–2004 Nissan Frontier in Base, SC, SE, SVE and XE trims. Other Frontier model years and other truck makes are not covered.
Other Nissan Frontier model years and other truck makes are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The floating hook moves along the rail, so check that the cover sits evenly on both sides after it is fitted and before the tension system is used.
What’s included
Check the package contents against your installation before starting.









