Overview
The TruXedo Lo Pro QT soft roll-up tonneau cover, part number TRX571801, is a low-profile soft cover for two vehicles: the 2014–2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2018 GMC Sierra 1500 in the Base, Denali, SLE and SLT trims. Its angled side rails sit less than 1 inch above the truck bed.
The design is aimed at owners who haul oversized loads or ATVs and want the cover off and back on quickly. TruXedo says re-installation takes about 5 minutes. The cover travels from fully closed to fully open in 20 seconds, and its tension control system keeps the cover snug when it is shut.
Attachment is handled by a 1-inch-wide Velcro brand loop running the length of the bed rail, with a floating hook that moves along the rail and no snaps or adhesives. Weather seals run on all four sides with corner seals, and TruXedo claims more seals than competing covers. Bed rails, bed liners and rail caps can be used alongside it.
Key features
- Soft roll-up tonneau cover with a low profile
- Side rails less than 1 inch above the truck bed
- Velcro brand loop 1 inch wide with a floating hook
- Tension control keeps the cover tight when closed
- Weather seals on all four sides
- Opens fully in 20 seconds
- Compatible with bed rails, bed liners and rail caps
- Manual operation
Hauling with a pickup bed cover
A soft roll-up cover is a bed cover rather than a load-bearing platform. It keeps dust, rain and loose items from the bed surface, but it does not support heavy weight placed on top of it. Heavy cargo should rest on the bed floor and be secured with tie-downs, not balanced on the cover.
Because the cover is removed for bulky hauling, the fastening and rails see regular use. Keep the Velcro loop free of grit and check the floating hook for smooth movement. Trucks used on rough roads may need more frequent checks of the rail contact points.
- Secure cargo to the bed floor, not the cover
- Keep the Velcro loop clean and free of grit
- Check rail contact points after rough-road trips
Specifications
| Brand | TruXedo |
|---|---|
| Part number | TRX571801 |
| Product line | Lo Pro QT |
| Tonneau type | Roll-up (soft) |
| Material | Soft |
| Side rail height | Less than 1 inch above the truck bed |
| Velcro loop width | 1 inch |
| Open time | 20 seconds, fully closed to fully open |
| Re-installation time | About 5 minutes |
| Operation | Manual |
| Fitment type | Direct fit |
| Rack compatible | No |
| Toolbox compatible | No |
Vehicle fitment
It fits the 2014–2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2018 GMC Sierra 1500 in the Base, Denali, SLE and SLT trims. Other model years are not covered.
Other trucks and model years are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TruXedo gives about 5 minutes for re-installation after removal. The cover is held by the Velcro brand loop and floating hook rather than snaps or adhesives, so the fastening runs along the bed rail.
What’s included
This part number is the Lo Pro QT soft roll-up tonneau cover. It is not toolbox compatible and not rack compatible.










