Overview
The Omix-Ada 18676.52 is an electric transfer case mode switch for 2007–2018 Jeep Wrangler (JK) models. It attaches to the transfer case, has five positions and replaces OE number 5083138AA.
The switch is designed to meet original equipment standards for fit.
Key features
- Electric transfer case mode switch
- Five-position switch
- Attaches to the transfer case
- Replaces OE number 5083138AA
- Suited to 2 and 4-door models
Seals and switch care
An electric mode switch sends a signal that tells the vehicle which transfer case mode is selected. When the switch wears, the dash indicator may lag, flicker or fail to match the lever position. Electrical problems can also come from a corroded connector, so the plug deserves attention whenever the switch is changed.
Work on the transfer case area with the vehicle secured and the battery disconnected. Replace the seal when the switch is removed if the old seal shows hardening, cracks or fluid staining. Clean the mating surface before fitting the new switch so the seal sits flat and does not leak after the first drive.
- Disconnect the battery before unplugging the switch
- Clean the mating surface before installing
- Check the connector for corrosion
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18676.52 |
| UPC | 804314293352 |
| Type | Electric transfer case mode switch |
| Positions | 5 |
| Body style | 2 and 4-door models |
| Replaces OE number | 5083138AA |
Vehicle fitment
The manufacturer fitment list covers 2007–2018 Jeep Wrangler (JK) models, including Rubicon, Sahara, Sport, Sport S, X and Unlimited trims.
Wrangler TJ models with the NV241OR transfer case are not a confirmed fit for this switch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Omix-Ada identifies part 18680.15 as the matching seal for this switch. Check the transfer case seal when you replace the switch, since the seal is a separate part.
What’s included
The electric transfer case mode switch, part 18676.52.
Not included: the transfer case switch seal, part 18680.15.














