Select your vehicle

Tomken Machine Rear Shackle Extensions – TMT-0413-X

Tomken Machine

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shackle extensions for the 1984–2001 Jeep Cherokee (XJ)
  • Adds 1 in. of length for rear use with a 1 in. lift
  • Pre-drilled heavy-duty steel with hardened bolts, auto-lock nuts and steel spacers
  • Black powder coat finish, sold in pairs
  • Part number TMT-0413-X, UPC 70000164456

Description

Overview

The Tomken Machine Rear Shackle Extensions, part number TMT-0413-X, are rear replacement shackles for the 1984–2001 Jeep Cherokee (XJ). They are 1 in. longer and are intended for rear use with a 1 in. lift.

Tomken describes them as heavy-duty replacement shackles made from heavy-duty steel. Each one is pre-drilled and fitted with hardened bolts, auto-lock nuts and steel spacers for added strength. The finish is a black powder coat, and the kit is sold in pairs.

Key features

  • Pre-drilled heavy-duty steel shackle body
  • Hardened bolts with auto-lock nuts
  • Steel spacers included for added strength
  • Adds 1 in. of length at the rear
  • Black powder coat finish
  • Sold in pairs for rear installation

Driveline and brake line checks

Rear shackle extensions change where the spring hangs, so the rear axle’s position relative to the body can shift slightly. That affects driveshaft angle, the routing of brake lines and fuel lines, and the clearance around the rear tires. Before driving, look at the driveshaft U-joints for binding, check the brake lines for stretch or contact, and confirm the fuel lines are not pinched near the spring.

Longer shackles often change ride height and handling, so road testing at low speed first is sensible. Keep the hardened bolts and auto-lock nuts tight, and recheck them after the first few drives. Steel spacers should sit square and flush against the shackle body. Check the spring bushings and shackle pivot points at each service, since a longer shackle puts the same load through different joints.

Specifications

Brand Tomken Machine
Part number TMT-0413-X
UPC 70000164456
Location Rear
Length change 1 in. longer
Lift Rear, with 1 in. lift
Material Heavy-duty steel
Finish Black powder coat
Included hardware Hardened bolts, auto-lock nuts, steel spacers
Quantity Sold in pairs
Fitment type Direct fit

Vehicle fitment

Tomken lists these rear extensions for the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.

The list does not include the Grand Cherokee (ZJ or WJ), the Liberty (KJ) or any Wrangler model. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the extension changes shackle length, recheck driveline and brake-line clearance after installing the pair, since the spring hangs in a new position at the rear.

What’s included

A pair of rear shackles with hardened bolts, auto-lock nuts and steel spacers.

SKU: TOMTMT-0413-X Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 12.00 × 12.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Do these Tomken shackles fit a 1984–2001 Jeep Cherokee XJ?

Yes, the listed fitment is the 1984–2001 Jeep Cherokee (XJ) in ten trims, including Base, Laredo and Limited. They are rear shackles, so they go at the rear springs only.

Are the Tomken Machine shackle extensions longer than stock?

Yes. They are 1 in. longer and are meant for rear use with a 1 in. lift. Check these figures against your current rear setup before ordering.

What comes with the pair?

The pair includes pre-drilled heavy-duty steel shackles with hardened bolts, auto-lock nuts and steel spacers. They have a black powder coat finish and are sold in pairs.

What is the part number and UPC for this kit?

The part number is TMT-0413-X from Tomken Machine and the UPC is 70000164456. Use both identifiers to match the exact shackle you need before choosing this kit.

Do longer rear shackles affect driveline angles?

They can. Changing the spring's hanging position moves the rear axle, which changes the driveshaft angle. Check the U-joints after installation for vibration or binding, and keep an eye on the driveline during the first drives. If angles look wrong, a driveline check by a shop is a practical next step.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon