Overview
The TeraFlex 3990250 is a rear axle coil spring pad for Jeep Wrangler TJ and LJ models. It is laser cut from 3/16 inch steel and designed for Dana 44 or Dana 60 axles with a 3″ diameter axle tube.
The pad is sold raw and must be welded in place, after which it can be painted or powder coated. It is a direct fit for the rear axle position.
Key features
- Laser cut from 3/16 inch steel
- Designed for Dana 44 or Dana 60 axles with a 3″ diameter tube
- Supplied raw, ready for welding and then paint or powder coating
- One coil spring pad per kit
- Rear position, direct fit
Welding and finishing the pad
A coil spring pad is a load point, so the weld that fixes it to the axle bracket is the main thing to get right. Clean the mating surfaces of rust and coating, then fit the pad square before welding. Welding on axle components should be done by a trained welder, since heat can affect the metal near the joint.
Raw steel can be painted or powder coated once welded, which helps protect the joint and the bare metal around it. Coat after welding rather than before, so the finish covers the weld area. Check the coil spring seats squarely on the pad, and inspect the weld and pad after the first few trips off road for cracks or movement.
- Clean mating surfaces before fitting
- Fit the pad square before welding
- Finish after welding to cover the joint
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3990250 |
| UPC | 843885002628 |
| Position | Rear |
| Material | 3/16 inch steel |
| Finish | Raw steel, ready for paint or powder coating |
| Axle compatibility | Dana 44 or Dana 60 |
| Axle tube diameter | 3″ |
| Included | One coil spring pad |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list names the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wranglers from the JK generation and other Jeep models are not on this list, so check the pad against your axle before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so have a qualified welder attach the pad to the axle tube. Paint or powder coat the raw steel after welding. Only trained welders should work on axle brackets, since the pad carries suspension loads.
What’s included
One coil spring pad per kit.
Not included: Axles and coil springs are not part of this kit.








