Overview
The TeraFlex 3990292 is a front passenger side coil spring pad for Jeep Wrangler TJ and LJ front axles. It is cut from 3/16 inch steel and suits Dana 44 or Dana 60 axles whose tube measures 3″ in diameter.
This pad mounts on the passenger side of the front axle bracket and must be welded in position. It is delivered raw and can be finished with paint or powder coating.
Key features
- Front passenger side position
- Laser cut 3/16 inch steel
- Suits Dana 44 or Dana 60 axles with 3″ tubes
- Raw steel for welding, then paint or powder coat
- One coil spring pad, direct fit
Passenger side pad installation
The passenger side pad works with the driver side pad to keep the front coil spring located on the axle, so its position needs to match the opposite side. Measure the spring seat on both sides after welding and confirm the springs sit level. A difference in height between the two sides can indicate a pad sitting out of position or a bent bracket.
Front suspension parts take repeated load, so bracket and weld condition deserve regular attention. Inspect the pad and weld after rough off-road trips for cracks, rust tracks, or movement. If the spring starts to shift on its seat, stop and have the pad checked before continuing to drive.
- Level check of both spring seats
- Weld and pad inspection after rough trips
- Bracket condition checked at service intervals
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3990292 |
| UPC | 843885002642 |
| Position | Front passenger side |
| Material | 3/16 inch steel |
| Finish | Raw steel |
| Axle compatibility | Dana 44 or Dana 60 |
| Axle tube diameter | 3″ |
| Included | One coil spring pad |
| Fitment type | Direct fit |
Vehicle fitment
Listed fitment for this pad covers the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
This pad is for the Wrangler years and trims named above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for a qualified fabricator to weld the pad onto the bracket, since welding is required and the pad carries suspension loads.
What’s included
One coil spring pad per kit.
Not included: The axle, the coil spring and the mounting bracket are not part of this kit.








