Overview
The Skyjacker IN200C is a black Teflon leaf spring wear pad with a non-greaseable design. It is a universal fit pad, so it is not matched to specific years, models or chassis codes. Wear pads like this one sit at leaf spring contact points where the spring moves against its mount, so measure the contact area on your spring before installing.
Key features
- Teflon wear pad material
- Non-greaseable design, so it requires no grease
- Black color
- Universal fit.
Care and maintenance
Leaf spring wear pads sit between the spring and its mount, taking friction where the two parts slide or rub. Over time that movement wears through the pad’s material and can let the spring knock or squeak against the bracket. A pad that is worn through, cracked or loose should be replaced before the spring surface itself is damaged. Inspecting the contact point during routine service helps catch wear early, especially on vehicles that see rough trails or regular articulation.
Teflon pads are used because they provide a low-friction surface, which reduces noise and helps the spring move freely. Non-greaseable pads do not take lubricant, so keep them clean and free of grit that can scratch the surface. When fitting a new pad, make sure it sits flat and fully against the spring without lifting or bunching. If the spring is also being serviced, check the leaf separation and the mounting hardware at the same time.
- Check for flat spots or cracks at the contact face
- Remove grit and debris before fitting
- Confirm the pad sits flush against the spring
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | IN200C |
| UPC | 803696143767 |
| Type | Teflon |
| Color | Black |
| Service | Non-greaseable |
| Fitment | Universal fit |
Vehicle fitment
The pad is universal fit and is not matched to individual vehicles, years or chassis codes. Measure the contact point on your spring before buying.
Confirm your vehicle’s year, model and trim before ordering.








