Overview
The Rigid Industries SAE PRO Fog Kit Pair is a set of two SAE D-Series fog lights with mounting brackets, a wiring harness and installation hardware. The fog light mounts are designed to fit directly into the factory fog light cavities on a vehicle, and the kit is offered as an SAE compliant lighting solution.
The mounts are made from 304 stainless steel with a scratch resistant powder coat finish. The kit is UV resistant, abrasion resistant and light weight. It is a universal fit, so confirm that your vehicle has factory fog light cavities before ordering.
Key features
- Two SAE D-Series fog lights included as a pair
- Mounts directly into factory fog light cavities
- SAE compliant lighting
- 304 stainless steel mounting brackets
- Scratch resistant powder coat finish
- UV resistant and abrasion resistant
- Light weight construction
Fog light wiring basics
Fog lights sit low on the front of a vehicle, so their wiring runs through the same areas that collect road spray and grit. A clean, sealed connection at the harness is the first thing to protect. Use a relay and fuse so the lights draw their current through a dedicated circuit rather than the factory switch, and keep the switch within easy reach of the driver.
Over time the most common faults are corroded terminals and cables rubbed through by loose clips. Inspect the harness after the first few drives, then again each season. Lenses with a powder coat finish can be wiped down with mild soap, but avoid harsh solvents that could dull the coating on the mounts.
- Use a fused relay on a dedicated circuit
- Seal and tape every exposed connector
- Check clips and cable ties each season
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774025280 |
| Lighting type | Fog lights, SAE D-Series, sold as a pair |
| Mount material | 304 stainless steel |
| Finish | Scratch resistant powder coat |
| Compliance | SAE compliant |
| Included | Two fog lights, mounting brackets, wiring harness, installation hardware |
Vehicle fitment
This kit is a universal fit and is not tied to a specific year, make, model or trim. Its mounts are designed for factory fog light cavities, so check that your vehicle has them.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes its own brackets, wiring harness and hardware for the factory fog light cavities. Fog lights are subject to local road-use rules, so check them before driving on public roads.
What’s included
Two SAE D-Series fog lights, mounting brackets, a wiring harness and installation hardware.









